Overview
The G2 Axle and Gear 2-2011-567 is a 5.67 ratio ring and pinion for the rear Ford 9 inch axle. It is a universal fit by axle type, so it is matched to the axle size rather than to a particular vehicle.
G2 says its gear sets are engineered for oversized tires and high performance engines, made with the latest technology and materials. A 5.67 ratio is a high numerical gear, giving more torque multiplication at the wheels than a 5.29 set.
Key features
- 5.67 ratio rear ring and pinion
- Ford 9 inch rear axle type
- Built for oversized tires and high performance engines.
- Constructed with the latest technology and materials.
Signs the old gears need replacing
Worn ring and pinion gears often announce themselves before they fail. Whining that rises with speed, clunking when the throttle is lifted and vibration under load are common early signs. Any of these should prompt an inspection of the gear faces and the carrier.
Look for pitting, chipping or a tooth pattern that sits toward one end of the teeth. Metal flakes in the gear oil or on the magnetic drain plug point to wear that has already started. Catching these signs early can prevent damage to the carrier and axle shafts.
When replacing the gears, treat the job as a full setup. Pinion bearings, crush sleeves and shims are usually renewed, and the new set needs to be checked for correct backlash before the axle is returned to service.
- Whine that changes with road speed
- Clunking when lifting off the throttle
- Metal particles in the gear oil
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2011-567 |
| UPC | 631410105490 |
| Gear ratio | 5.67 |
| Axle location | Rear |
| Axle type | Ford 9 inch |
| Popular axle manufacturer | Ford |
Vehicle fitment
It fits the Ford 9 inch rear axle at a 5.67 ratio. Confirm the housing size for your vehicle before ordering.
Only the Ford 9 inch is named for this 5.67 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 5.67 Ford 9 inch gears need a driveline shop, and the set should be broken in carefully before it is loaded.
What’s included
A 5.67 ring and pinion set for the Ford 9 inch.
















