Overview
The G2 Axle and Gear 2-2046-373L is a 3.73 ratio ring and pinion for the rear Ford 10.25 Inch axle. The pinion turns 3.73 times for each full turn of the ring gear, a middle-range ratio that adds low-speed pulling force while keeping engine speed moderate on the highway.
The long version is made for the rear Ford 10.25 Inch axle and is built for oversized tires and high-performance engines. It is made for the Ford 10.25 Inch and 10.5 Inch axle types in the rear position. Measure the ring gear and confirm the housing before ordering.
Key features
- 3.73 gear ratio for the Ford 10.25 Inch rear axle
- Rear axle location
- Long version design
- Designed for oversized tires and high-performance engines.
- Made with current materials and manufacturing methods.
Choosing a rear gear set
Rear ring and pinion sets are chosen around the housing they fit, the tire diameter and how the vehicle is driven. A long-style set places the gear mesh in a different package, so the carrier and housing dimensions deserve a careful look before the old gears come out. Check the existing carrier markings and ring gear size against the new part’s requirements.
Gear ratio decisions go hand in hand with the rest of the drivetrain. Heavier tires, a locker or a different axle shaft can all change how the gears load up. Many owners replace the pinion bearings, carrier bearings and seals while the axle is open, which keeps the new gears running in a fresh, consistent setup.
- Housing and carrier dimensions
- Ring gear diameter on the existing axle
- Pinion seal and yoke condition
- Carrier bearing and shim replacement
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-373L |
| UPC | 631410115703 |
| Axle type | Ford 10.25 Inches or Ford 10.5 Inches |
| Axle location | Rear |
| Version | Long (per title) |
| Gear ratio | 3.73 |
| Axle manufacturer | Ford |
Vehicle fitment
This 3.73 long set is made for the rear Ford 10.25 Inch axle. Confirm the housing type, ring gear size and carrier on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tooth contact and backlash on a 10.25 inch set need measured setup, which a gear shop provides. Plan for a break-in period before sustained heavy loads.
What’s included
One 3.73 long ring and pinion set for the rear Ford 10.25 Inch axle, part number 2-2046-373L.
Not included: Carrier bearings and shims are not part of the 3.73 long set.















