Overview
The G2 Axle and Gear 2-2027-456 is a 4.56 ratio ring and pinion for the front Chrysler 8 Inch IFS axle. A 4.56 ratio means the pinion makes 4.56 turns for every full turn of the ring gear, a numerically high setting that multiplies torque to the front wheels and is commonly paired with larger tires.
G2 says its Performance Ring and Pinion range is made for oversized tires and high-performance engines and uses current materials and manufacturing methods. The title places this set on the front 8 inch IFS axle. No individual vehicles or model years are named, so measure or identify the front axle before ordering.
Key features
- 4.56 gear ratio for the Chrysler 8 Inch IFS front axle
- Front axle location
- Ring gear and pinion supplied as one matched set
- Built for oversized tires and high-performance engines.
- Made with current materials and manufacturing methods.
Front axle break-in and setup
A front gear swap is more involved than a rear swap because the IFS carrier sits inside the front housing and has to be set up in place. Pinion depth, backlash and preload all interact, so the gears need to be checked together after installation. Clean the housing completely and inspect the carrier bearings for play before the new set goes in.
A 4.56 set changes how the front axle works under load. Torque to the front wheels rises, which helps with bigger tires and steep climbs, while engine speed at highway cruise goes up. Owners who run the front axle in four-wheel drive should expect extra heat on long grades. A break-in run with gradual throttle lets the new teeth seat before the axle sees heavy use.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2027-456 |
| UPC | 631410093742 |
| Axle type | Chrysler 8 Inches (IFS) |
| Axle location | Front |
| Gear ratio | 4.56 |
| Axle manufacturer | Chrysler |
Vehicle fitment
Confirm that the front housing on your vehicle is a Chrysler 8 Inch IFS unit before buying. This 4.56 set is made for the front axle only, so identify the housing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front gear swap means setting pinion depth and backlash inside the IFS housing, and the carrier bearings need correct preload. A gear shop is the usual installer, and the new teeth need a break-in period.
What’s included
One 4.56 ring and pinion set for the Chrysler 8 Inch IFS front axle, part number 2-2027-456.
Not included: Carrier bearings, shims and installation hardware are not included with the 4.56 front set.
















