Select your vehicle

G2 GM 7.5 Inch 10 Bolt 3.42 O.E.M. Ratio Ring and Pinion – 1-2015-342

G2 Axle and Gear

Shop G2 Axle And Gear Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 3.42 ratio O.E.M. series ring and pinion for the GM 10 bolt 7.5 inch rear axle, part 1-2015-342
  • Rear axle location
  • O.E.M. series, made under contract with original equipment manufacturers
  • Runs cooler and quieter than aftermarket gears.

Description

Overview

The G2 Axle and Gear 1-2015-342 is a 3.42 ratio O.E.M. series ring and pinion for the GM 10 bolt 7.5 inch rear axle. It fits the rear location and is matched by housing size.

The 3.42 O.E.M. set runs cooler and quieter than aftermarket gears. Its ratio is sized for the 7.5 inch 10 bolt housing, and the gears were produced for original equipment manufacturers.

Key features

  • O.E.M. series 3.42 ring and pinion
  • GM 10 bolt 7.5 inch rear axle
  • Rear axle location
  • Built under contract with original equipment manufacturers.
  • Runs cooler and quieter than aftermarket gears.

Why the ratio matters

A 3.42 ratio is a relatively mild gear, so the engine turns more slowly at highway speed than it would with a taller numerical ratio. That often means quieter cruising and less strain on the drivetrain, though pulling power from a stop is lower. Changing tire size later shifts the effective ratio, so keep the tire diameter in mind when deciding whether a new set is worth it.

Gear replacement is also a chance to look at the pinion seal, the carrier bearings and the axle shafts. These parts wear slowly and are easy to overlook until a new gear set starts to whine. Check for leaks at the cover and axle seals, and make sure the cover gasket seals correctly on reassembly. Keep the bolts snug and re-check them after the first few drives.

Specifications

Brand G2 Axle and Gear
Part number 1-2015-342
UPC 631410092752
Gear ratio 3.42
Axle location Rear
Axle type GM 10 bolt 7.5 inch
Popular axle manufacturer GM
Series O.E.M.

Vehicle fitment

The 3.42 set is for the GM 10 bolt 7.5 inch housing. Confirm the housing size before ordering.

Only the GM 10 bolt 7.5 inch is named for this 3.42 set. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A driveline shop should set pinion depth, backlash and bearing preload on the 7.5 inch 3.42 gears before the axle goes into service.

What’s included

A matched O.E.M. series ring and pinion for the GM 10 bolt 7.5 inch rear axle.

SKU: G/21-2015-342 Category:

Specification

Shipping weight 26.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Does 1-2015-342 fit the GM 10 bolt 7.5 inch rear axle?

Yes, it is made for the GM 10 bolt 7.5 inch housing in the rear location. Confirm the housing size before ordering, since the 3.42 ratio must match your axle.

Is this a 3.42 ratio set?

Yes, it is a 3.42 ratio O.E.M. series ring and pinion. The series runs cooler and quieter than aftermarket gears, and the gears are made for original equipment manufacturers.

Does it need a particular carrier?

No carrier is named for this set. Check the carrier for the 3.42 ratio before installing, and have a driveline shop set pinion depth and backlash.

Can a 3.42 set be used on a vehicle that tows?

It depends on the load and the tire size. Lower numerical ratios generally give less pulling power at low speed, so weigh the towing demand against what the axle and cooling system can handle before deciding.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop G2 Axle And Gear Ring And Pinions on Amazon