Overview
The G2 Axle and Gear 2-2029-390 is a 3.90 ratio ring and pinion for the rear Chrysler 8.25 Inch axle. The pinion turns 3.90 times for each ring gear revolution, which multiplies engine torque at the wheels more than numerically lower ratios.
The set is made for oversized tires and high-performance engines, using current materials and methods. It is made for the 8.25 Inch Chrysler rear axle, so measure the ring gear and confirm the carrier on your vehicle before buying.
Key features
- 3.90 gear ratio for the Chrysler 8.25 Inch rear axle
- Rear axle location
- Ring gear and pinion supplied as a matched set
- Designed for oversized tires and high-performance engines.
- Made with current technology and materials.
Towing and the 8.25 rear axle
The rear axle housing and carrier decide whether a 3.90 set can be used, so measure before ordering. Confirm the ring gear diameter and check the carrier, since a mismatch will show up as noise or early wear after installation.
Towing puts the heaviest load on the ring and pinion. Trailer weight, hitch loads and steep grades all add stress to the teeth, so inspect the gear oil for metal particles at regular intervals. Keep the cooling and transmission temperatures in mind on long pulls, since higher engine speed at cruise adds heat across the drivetrain. Fresh gear lubricant and a proper break-in help the new set last.
Tire size also matters. Taller or wider tires reduce the effective ratio and change how hard the gears work, so a 3.90 set may feel different after a tire change. Check the setup again after large tire changes to confirm backlash still falls within the range the installer measured.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2029-390 |
| Axle type | Chrysler 8.25 Inches |
| Axle location | Rear |
| Gear ratio | 3.90 |
| Axle manufacturer | Chrysler |
Vehicle fitment
Measure the ring gear and confirm the carrier on your vehicle before ordering. This 3.90 set is made for the Chrysler 8.25 Inch rear axle, so confirm the axle size first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3.90 set needs careful tooth contact and carrier preload, so a gear shop with setup tools is the practical installer. Plan on a break-in period before loaded towing.
What’s included
One 3.90 ring and pinion set for the Chrysler 8.25 Inch rear axle, part number 2-2029-390.
Not included: Carrier bearings, shims and hardware are not included with the 3.90 set.
















