Overview
The G2 Axle and Gear 1-2091-323 is a 3.23 ratio ring and pinion set for the GM 12 bolt 9.76 inch rear axle. It fits the rear location and suits universal fit by axle type.
G2 says its performance ring and pinion sets are built for oversized tires and high performance engines, using the latest technology and materials. The 3.23 ratio is a numerically low gear, so it gives less torque multiplication than a 3.42 or 4.10 set.
Key features
- 3.23 ratio rear ring and pinion set
- GM 12 bolt 9.76 inch rear axle type
- Engineered for oversized tires and high performance engines.
- Made with the latest technology and materials.
Gear ratio and daily driving
A 3.23 ratio is a numerically lower gear, so it suits highway cruising where engine speed stays low, and it gives less torque multiplication when starting from a stop. Engine noise and fuel use can be easier to manage at this ratio, though the choice still depends on tire size and how the vehicle is driven.
Changing ratios on a 9.76 inch axle means setting the new gears in the carrier with correct pinion depth and backlash. Many owners have the setup checked after the first drives, since the gear mesh can settle as the teeth wear in.
- Match tire diameter to the chosen ratio
- Check the carrier and housing before ordering
- Have backlash and contact pattern checked after installation
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2091-323 |
| UPC | 631410136227 |
| Gear ratio | 3.23 |
| Axle location | Rear |
| Axle type | GM 12 bolt 9.76 inch |
| Popular axle manufacturer | GM |
Vehicle fitment
It is for the GM 12 bolt 9.76 inch axle at a 3.23 ratio. Confirm the housing size and your vehicle’s year, model and trim before ordering.
Only the GM 12 bolt 9.76 inch is named for this 3.23 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 9.76 inch 3.23 gears should be set by a driveline shop before the axle is put into service.
What’s included
A 3.23 ring and pinion set for the GM 12 bolt 9.76 inch.
















