Overview
The G2 Axle and Gear 95-2025-301 is a one piece replacement axle shaft for the AMC 20 rear axle, made for the driver side of the 1982–1986 Jeep CJ5, CJ7 and Scrambler. It has 29 splines.
The application is a CJ fitted with the one piece axle kit. The steel is forged from high grade alloy and heat treated beyond OEM specifications.
The 95-2025-301 serves the early-to-mid 1980s CJ models with the AMC 20 axle and the one piece axle kit, on the driver side. With 29 splines, it should be matched with gears of the same count. G2 Axle and Gear says its shafts are forged from high grade alloy steel and heat treated beyond OEM specifications for extended service life.
Key features
- One piece AMC 20 shaft design
- 29 splines
- Driver-side shaft
- For 1982–1986 CJ models
- Forged and heat treated alloy steel
- Used with the one piece axle kit
Gear and spline matching
Spline count decides whether a replacement shaft will seat in the differential side gear. Two shafts that look alike can differ in splines, so the count has to match the gears in the axle before anything else is installed. On a one piece AMC 20 setup, a mismatch usually shows up as a shaft that will not slide in, or one that slips under throttle once the bolts are torqued.
Early CJ axles often have age-related wear, so inspect the axle housing bore and the bearing surfaces when the shaft is out. Look for scoring, pitting or heat discoloration around the splines. Clean the mating surfaces and replace any worn seals, since a leak can ruin a new bearing within a short time.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2025-301 |
| UPC | 631410096729 |
| Product type | Replacement axle shaft |
| Axle type | AMC 20 |
| Axle location | Rear |
| Shaft position | Driver Side |
| Spline count | 29 |
| Stated application | 82-86 Jeep CJ w/One Piece Axle Kit |
Vehicle fitment
It fits the 1982–1983 Jeep CJ5, the 1982–1986 Jeep CJ7 and the 1982–1985 Jeep Scrambler.
The CJ5 appears through 1983, the Scrambler through 1985 and the CJ7 through 1986. Earlier CJs are not covered by these dates. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Confirm your axle is set up for the one piece axle kit.
- Match the 29-spline count to your gears.
What’s included
One driver-side one piece axle shaft (95-2025-301).
Not included: The axle kit and wheel studs are not included.







