Overview
The G2 Axle and Gear 2-2028-321 is a 3.21 ratio ring and pinion for the rear Chrysler 9.25 Inch axle. The pinion turns 3.21 times for each ring gear revolution, a numerically lower ratio that keeps engine speed down at highway speed.
The set fits the rear Chrysler 9.25 Inch axle. It is made with oversized tires and high-performance engines in mind, using current materials and manufacturing. Vehicle models and years are not identified, so confirm the housing size on your vehicle before ordering.
Key features
- 3.21 gear ratio for the Chrysler 9.25 Inch rear axle
- Rear axle location
- Ring gear and pinion sold as one set
- Designed for oversized tires and high-performance engines.
- Made with current technology and materials.
Highway cruising and load
A 3.21 ratio is a numerically lower gear, so the engine turns more slowly at a given road speed. That usually means calmer highway cruising and better fuel use with a stock setup. The trade-off is weaker pull from a standstill and on steep grades, so loaded towing will feel the gear more than daily driving does.
The 9.25 inch rear is a common heavy-duty housing, and its carrier takes a lot of load. Inspect the axle bearings, the carrier and the pinion seal when the cover is off. Replacing the pinion bearings and shims with the gears keeps the new mesh stable and avoids a second teardown.
- Check the pinion seal for leaks
- Replace pinion bearings with the gears
- Recheck backlash after a few drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2028-321 |
| UPC | 631410093759 |
| Axle type | Chrysler 9.25 Inches |
| Axle location | Rear |
| Gear ratio | 3.21 |
| Axle manufacturer | Chrysler |
Vehicle fitment
Fitment is not tied to specific vehicles. The 3.21 set matches the Chrysler 9.25 Inch rear axle, so measure the ring gear and confirm the housing on your vehicle before ordering. Confirm the axle size before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and carrier preload all have to be set with measurement tools, so most owners rely on a gear shop. Break the new gears in gradually before sustained highway use.
What’s included
One 3.21 ring and pinion set for the Chrysler 9.25 Inch rear axle, part number 2-2028-321.
Not included: Bearings and shims for the 3.21 rear set are not part of this set and may be needed.















