Overview
The G2 Axle and Gear 66-2011CA is an aluminum 3rd member case for the Ford 9 inch rear axle, with a 3.250 inch bore. A 3rd member is the carrier housing that holds the ring gear and differential inside the rear axle, and this case is built for Ford 9 inch housings.
G2 says its 3rd member cases are designed for the stresses of high horsepower engines and large tires. The brand offers nodular iron for maximum strength and aluminum for maximum weight savings, and this product is the aluminum version.
Key features
- Aluminum case, the weight-saving option in G2’s range
- 3.250 inch bore
- Rear position, Ford 9 inch housing type
- Designed by G2 for high horsepower engines and large tires
Weight and strength trade-offs
Choosing between aluminum and nodular iron comes down to what matters more to you. Aluminum saves weight at the rear of the vehicle, which can help handling and suspension travel. Nodular iron adds mass but resists flex under heavy loads, so it suits towing or extreme torque.
Replacing a 3rd member is a major job. The case, ring gear, differential and bearings all need to be set up together, and a mistake in preload or pinion depth shows up as noise or early wear. Plan the job with a professional if you are not experienced with gear setup.
Check the case for cracks or bore wear before reuse, especially around the carrier bearing bore. Aluminum can gall where steel parts rub, so use a light coat of assembly lube on mating surfaces during installation.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 66-2011CA |
| UPC | 631410096538 |
| Material | Aluminum |
| Bore | 3.250 inch |
| Position | Rear |
| Housing type | Ford 9 inch |
| Fitment label | Universal Fit |
Vehicle fitment
It is made for the rear Ford 9 inch housing type. Vehicle years, makes and models are unknown, so confirm the rear axle is a Ford 9 inch before ordering. The Universal Fit label does not identify a vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a 3rd member means reinstalling the ring gear and differential inside the axle, which requires careful gear setup and is usually handled by a professional.
What’s included
Whether the ring gear, differential, bearings or axle shafts come with the case is unknown. Check the package contents before installing.









