Overview
The G2 Axle and Gear 8×6.5 GM bolt pattern wheel spacer, part number 93-82-200, is a 2 inch thick black anodized aluminum spacer for GM 8 on 6.5 hubs. It is meant for off-road use and widens track width for wider wheels or tires.
The spacers are sold in pairs and include Grade 8 studs pressed in, lug nuts and thread locker compound. They are made from aluminum alloy.
Key features
- 8×6.5 GM bolt pattern
- 2 inch thickness
- Black anodized finish for corrosion resistance
- Grade 8 studs pressed in
- Limited Lifetime Warranty
- Off-road use only
Off-road spacer setup
Off-road wheels see side loads, rock strikes and changing tire pressure, so a spacer adds stress to the hub and studs over time. Keep the hub face clean and free of rust, and confirm the spacer sits flat before the lug nuts are tightened. Bearings also carry the extra leverage of a wider track, so listen for changes in noise after a trip.
Trail use can loosen fasteners, so plan on checks after the first few outings and at regular intervals. Look for stud movement, cracks around the spacer and any sign of rubbing on the fender. Replace any stud that is bent or has damaged threads, and keep a spare set of lug nuts in the vehicle.
- Clean the hub face before each install
- Check lug nuts after the first few outings
- Inspect the spacer for cracks after rough trails
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 93-82-200 |
| UPC | 631410126242 |
| Bolt pattern | 8×6.5 GM |
| Thickness | 2 inch |
| Material | Aluminum alloy |
| Finish | Black anodized |
| Included | Grade 8 studs pressed in, lug nuts, thread locker compound |
| Intended use | Off-road use only |
| Warranty | Limited Lifetime Warranty coverage |
Vehicle fitment
No vehicle is named for this spacer. Use it only where the hub matches the 8×6.5 GM bolt pattern.
Make sure the year, model and trim match before ordering. This spacer is intended for off-road use only.
Installation notes
The studs are already pressed in, so the spacer mounts with the supplied lug nuts. Inspect the studs and hub face before mounting.
What’s included
Spacers sold in pairs, Grade 8 studs pressed in, lug nuts and thread locker compound.



















