Overview
The G2 GM 8.5-inch and 8.6-inch 10 bolt aluminum cover (part number 40-2021AL) is a rear cover for GM 10 bolt axles of 8.5 and 8.6 inches only. It is cast from lightweight aluminum and left in a raw, natural finish.
The cover is built to protect the ring and pinion and to help cool the gear oil, which supports bearing life. Reinforcing ribs add rigidity, and the cover is heat treated and shot peened to resist direct hits.
Key features
- Reinforcing ribs for added rigidity and strength
- Cast from lightweight aluminum to dissipate heat
- Raw natural aluminum finish
- Heat treated and shot peened
- Fully machined seal surface
Gear oil and axle care
An axle cover is often the first part to meet trail debris, so inspect it after rough trips for dents and cracks. Keep the mating surface clean and free of old gasket material before reinstalling. A clean, flat seal surface helps prevent leaks around the cover.
Gear oil condition matters as much as the cover. Check the fluid level and look for metal flakes or a burnt smell when the cover is off, and change the oil on a schedule suited to your driving. Aluminum covers can be scratched, so avoid prying tools against the surface. Keep the cover’s cooling area clear of mud when you clean the axle.
- Clean the mating surface before reinstalling
- Check gear oil for metal flakes
- Inspect the cover after rough use
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2021AL |
| Axle location | Rear |
| Axle types | GM 10 bolt 8.5 inches and GM 10 bolt 8.6 inches |
| Material | Aluminum |
| Oil capacity | Extra capacity |
| Finish | Natural, raw aluminum |
Vehicle fitment
This is an axle part for GM 10 bolt rear axles of 8.5-inch and 8.6-inch size. Because the cover is made for an axle size rather than a vehicle, confirm that size before ordering.
Installation notes
The seal surface is fully machined for a leak-free installation, so the mating surface on the axle housing should be clean before the cover is set in place.












