Overview
The G2 Dana 35 Aluminum Cover, part number 40-2049AL, is a raw cast aluminum rear differential cover sized for Dana 35 rear axles. It protects the ring and pinion, and G2 designed it to help cool gear oil so bearings can last longer.
Each casting is heat treated and shot peened to withstand direct impact, and the seal surface is fully machined. The finish is raw natural aluminum, so the cover keeps a bare metal look. Dana and Jeep are named as popular axle manufacturers, with no vehicle years or models.
Key features
- Cast from lightweight aluminum to dissipate heat
- Reinforcing ribs for rigidity and strength
- Heat treated and shot peened to help handle direct impact
- Seal surface machined to help avoid leaks on installation
- Raw natural aluminum finish
Keeping the gear oil cool
Rear covers on a Dana 35 axle work hard in a simple way: they shield the gears and hold the oil that lubricates them. Heat from the ring and pinion builds during towing and rock crawling, and a cover that sheds heat helps keep the oil in good condition. Before installing any cover, clean the housing face and check it for dents that could prevent a flat seal.
Look for signs the old cover needs replacing, such as a seam that weeps oil, a cracked flange, or bolt holes that have stretched. When the cover comes off, it is a good moment to inspect the carrier bearings and drain the fluid for metal shavings. Tighten the bolts in a crisscross pattern and check the level after the first short drive.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2049AL |
| UPC | 631410096200 |
| Material | Lightweight cast aluminum |
| Finish | Raw natural aluminum |
| Axle location | Rear |
| Axle size | Dana 35 |
| Oil capacity | Extra capacity |
Vehicle fitment
It is sized for the Dana 35 rear axle. Measure the housing before ordering to confirm the match.
Measure the housing and confirm the Dana 35 axle name before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Look over the box for bolts, a gasket or a drain plug before starting the install.
























