Overview
The G2 2-2046-355L is a 3.55 ratio ring and pinion for the rear Ford 10.25 Inch axle. The pinion turns 3.55 times for every ring gear revolution, a moderate ratio that balances low-speed pulling with engine speed at highway cruise. This is the long version of the set.
G2’s Performance line is made for oversized tires and high-performance engines. This set is made for rear Ford 10.25 Inch and 10.5 Inch axle types. Measure the ring gear and check the housing before buying.
Key features
- 3.55 gear ratio for the Ford 10.25 Inch rear axle
- Rear axle location
- Long version of the set
- Designed for oversized tires and high-performance engines.
- Built with current materials and manufacturing methods.
Matching the carrier and axle
A 10.25 inch Ford rear axle depends on the carrier to hold the ring gear in the right position against the pinion. Even a correct ring and pinion can produce whine or uneven wear if the carrier bearings are worn or the preload is off. Many rebuilds therefore include new carrier bearings, pinion bearings and seals alongside the gear set, which keeps the job consistent.
A 3.55 ratio is often picked for daily driving with a mix of highway and light towing. It keeps engine speed moderate on the highway and offers reasonable pulling force from a stop. Heavier loads or much larger tires may call for a steeper ratio, so think about your normal load before choosing.
Once installed, watch for noise under load and coast, and check the differential fluid after the first few drives. Metal flakes in the fluid suggest wear and should be checked before the axle sees heavy use. A gear shop with measuring tools is the usual choice for setting mesh and preload on this size of axle.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-355L |
| UPC | 631410094459 |
| Axle type | Ford 10.25 Inches or Ford 10.5 Inches |
| Axle location | Rear |
| Version | Long (per title) |
| Gear ratio | 3.55 |
| Axle manufacturer | Ford |
Vehicle fitment
This 3.55 set is made for the rear Ford 10.25 Inch or 10.5 Inch axle. Measure the ring gear and confirm the housing on your vehicle before ordering, and confirm fit for your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear mesh and carrier preload on a 10.25 inch set are set with measuring tools, so a gear shop is the usual installer. Break the new gears in before towing.
What’s included
One 3.55 long ring and pinion set for the Ford 10.25 Inch rear axle, part number 2-2046-355L.
Not included: Carrier bearings and shims for the 3.55 long set.
















