Overview
The G2 Axle and Gear 4-TJ2-488 is a 4.88 ratio front and rear ring and pinion kit for the Jeep Wrangler TJ, 1997-2006. It is for non-Rubicon models with a Dana 30 front axle and a Dana 44 rear axle.
G2 says these gears are designed to hold up to oversized tires and high performance engines, and this kit changes both axles together. The front and rear master installation kits are matched to their own gear sets and come in the same package.
Key features
- Front and rear 4.88 ratio ring and pinion sets
- Dana 30 front and Dana 44 rear axles
- Matched front and rear master installation kits
- Computer heat treated 8620 steel
- Double shot peened, double lapped gears
Tire size and gearing
Oversized tires shift the balance of a Jeep’s drivetrain. Each mile of travel turns the axles fewer times, so a numerically higher gear helps the engine pull the tire through rocks, mud and steep climbs. The gain comes with slower cruising and more engine speed on the highway.
Gearing decisions are easier when the rest of the drivetrain is known. Check the transfer case ratio, the tire diameter and the engine’s power band before committing. Expect setup work after installation, and keep an eye on differential temperature and gear noise during the first trips.
- Know your tire diameter before choosing
- Consider transfer case ratio and engine power
- Expect higher engine speed at highway pace
- Watch for gear noise during early trips
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-TJ2-488 |
| UPC | 700007521931 |
| Gear ratio | 4.88 |
| Front axle | Dana 30 |
| Rear axle | Dana 44 |
| Material | Computer heat treated 8620 steel |
| Models | Non-Rubicon |
| Warranty | Limited lifetime |
Vehicle fitment
The TJ chassis code gives the Jeep Wrangler (TJ), 1997-2006. The kit is for non-Rubicon models with a Dana 30 front and Dana 44 rear.
Wranglers outside the 1997-2006 TJ years, including the YJ, LJ and JK, are not covered. The set is for non-Rubicon models, so Rubicon owners should check the axle setup before ordering. Verify year, model and trim before ordering.
Installation notes
Set the pinion depth and backlash after the new gears go in. Keep each master installation kit with its matching gears, and have the carriers checked with the proper tools.
What’s included
Front and rear 4.88 ring and pinion sets, plus matched master installation kits for both axles.
Not included: The carriers are sold separately.

















