Overview
The G2 Dana 44 5.38 Ratio Ring and Pinion (part number 2-2033-538) is a 5.38 ratio gear set for Dana 44 axles. It works in the front or rear axle location and is built for owners running larger tires or more power.
G2 describes its ring and pinion sets as engineered for oversized tires and high-performance engines, using current technology and materials. The set is aimed at owners running larger tires or more power.
Key features
- 5.38 gear ratio
- Dana 44 axle type
- Front or rear axle location
- Engineered for oversized tires and high-performance engines.
Setup and break-in
Gear sets at a 5.38 ratio are most often used with larger tires or more power, where the axle works harder at low speed. Before the set is installed, confirm the axle type and gear ratio against the rest of the drivetrain, since the carrier and housing must suit the gears. Gears from this range are normally set up by a shop that handles mesh and pinion depth.
A break-in period lets the new teeth seat against each other. Keep loads and hard throttle light for the first trips, then re-check bolt torque and look for leaks. Gear oil with the correct specification should be used, and it should be changed once the break-in is complete. Listen for whine, and inspect the cover gasket after the first few drives.
- Keep towing light during break-in
- Re-check cover bolts after the first drives
- Change the gear oil once break-in is complete
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-538 |
| UPC | 631410094084 |
| Axle manufacturer | Dana |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Gear ratio | 5.38 |
Vehicle fitment
It fits Dana 44 front and rear axles, so the axle type and gear ratio on your vehicle decide compatibility. Confirm the axle type and gear ratio before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring and pinion sets like this need professional setup and a break-in period before they are used hard.
What’s included
A ring and pinion gear set with a 5.38 ratio, sold as part number 2-2033-538.















