Overview
The G2 Axle and Gear 2-2046-411-37 is a 4.11 ratio ring and pinion for the Ford 10.5 Inch axle. The pinion turns 4.11 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels and suits larger tires.
This Performance set is designed for oversized tires and high-performance engines. The 37 spline count must match the axle shafts on your vehicle, so confirm the axle size and spline count before buying.
Key features
- 4.11 gear ratio for the Ford 10.5 Inch axle
- 37 spline
- Ring gear and pinion sold as one set
- Built for oversized tires and high-performance engines.
- The set uses current materials and manufacturing methods.
Gearing and tire size
Tire size and gear ratio work together. Larger tires already turn the axle more slowly for each mile traveled, so a numerically high set helps the engine keep pace with the wheels. The trade-off is higher engine speed at a steady highway cruise and more load on the drivetrain when towing or climbing.
When choosing a ratio, look at how the vehicle will be used most. Daily highway driving, frequent towing and trail work call for different balances. Gearing changes also affect speedometer accuracy, so a calibration or tuning check may be worth considering after installation, especially on vehicles with electronic speed sensing.
- Tire diameter and rolling radius
- Typical highway and trail use
- Speedometer calibration after the change
- Pinion and carrier bearing condition
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-411-37 |
| UPC | 631410142143 |
| Axle type | Ford 10.5 Inches |
| Spline count | 37 (per title) |
| Gear ratio | 4.11 |
| Axle manufacturer | Ford |
Vehicle fitment
It is made for the Ford 10.5 Inch axle with 37 spline. Confirm the axle type and spline count on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4.11 set needs measured tooth contact and carrier preload, so a gear shop is the usual route. Expect a break-in run before loaded towing.
What’s included
One 4.11 ring and pinion set for the Ford 10.5 Inch axle with 37 spline, part number 2-2046-411-37.
Not included: Carrier bearings, shims and hardware are not part of the 4.11 37 spline set.








