Overview
The G2 Axle and Gear 2-2011-430 is a 4.30 ratio ring and pinion for the Ford 9 inch rear axle. The rear location is the one G2 lists, and the universal fit by axle type means the set is matched to the axle rather than a named vehicle.
G2 says its performance sets are engineered for oversized tires and high performance engines, made with the latest technology and materials. A 4.30 ratio multiplies torque at the wheels more than a 4.11 ratio.
Key features
- 4.30 ratio rear ring and pinion
- Ford 9 inch rear axle type
- Designed for oversized tires and high performance engines.
- Made with the latest technology and materials.
Choosing a 4.30 gear set
A 4.30 ring and pinion is a common step for owners who want quicker acceleration and more pulling force at low speed. The ratio changes how many times the pinion turns for each turn of the ring gear, so the engine works harder to hold highway speed than it would with a lower number.
Before buying, look at the rest of the drivetrain. Tire diameter, transmission gearing and engine output all affect how a 4.30 set feels in use. Owners who run much larger tires often find the ratio pairs well with a stronger drivetrain, while daily drivers may notice more engine noise on the highway.
Ring and pinion gears are usually replaced as a matched pair, and the carrier, pinion bearings and shims are often serviced at the same time. Inspect the carrier bearings and the axle seals when the gears come out, since worn bearings can cause whine that is easy to confuse with gear wear.
- Check the carrier type before purchase
- Plan for a full gear setup, not a gear swap alone
- Inspect axle seals while the housing is open
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2011-430 |
| UPC | 631410105438 |
| Gear ratio | 4.30 |
| Axle location | Rear |
| Axle type | Ford 9 inch |
| Popular axle manufacturer | Ford |
Vehicle fitment
It fits the Ford 9 inch rear axle at a 4.30 ratio. Confirm the housing size for your vehicle before ordering.
Only the Ford 9 inch is named for this 4.30 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 4.30 Ford 9 inch gears should be set by a driveline shop, then the axle should go through a break-in period.
What’s included
A 4.30 ring and pinion set for the Ford 9 inch.
















