Overview
The G2 Axle and Gear 2-2014-345 is a ring and pinion for the rear Ford 7.5 Inch axle. The product name gives a 3.45 ratio, while the attribute list reads 3.42. Confirm the exact ratio with G2 or on the box before ordering, because a few hundredths of a ratio change the gear mesh and the carrier setup.
G2 describes its Performance Ring and Pinion sets as built for oversized tires and high-performance engines, using current materials and manufacturing methods. The set is identified by axle type. No vehicle models or years are given, so the 7.5 Inch Ford housing is what needs checking.
Key features
- Ring gear and pinion sold as one set for the Ford 7.5 Inch axle
- Ratio shown as 3.45 in the product name and 3.42 in the attributes
- Designed for oversized tires and high-performance engines.
- Made with current materials and manufacturing methods.
- Rear axle location
Ratio and carrier setup
A few hundredths of a ratio change the mesh of the ring gear and pinion, and carrier setup is sized to the exact ratio. Before buying, confirm the ratio on the box label or on the gear markings, then compare it with the existing gears in the axle. Matching the carrier and pinion depth to the ratio reduces noise and early wear, and avoids a second teardown.
Mixing parts from different ratios is a common source of trouble. A gear set that does not match the carrier shims or pinion spacer may run noisy or fail early. Count the teeth on the ring gear and pinion if there is doubt, and confirm the setup on a 7.5 Inch axle before the vehicle returns to road use. Plan time for the measurements, since rushed installs cause most problems.
- Confirm the ratio from the gear markings
- Count ring and pinion teeth if the markings are unclear
- Match carrier shims and pinion spacer to the set
- Verify tooth contact before the first road test
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2014-345 |
| UPC | 631410105193 |
| Axle type | Ford 7.5 Inches |
| Axle location | Rear |
| Gear ratio | 3.45 (product name); 3.42 (attribute list) |
| Axle manufacturer | Ford |
Vehicle fitment
The set is matched to the Ford 7.5 Inch rear axle, so verify that housing on your vehicle and confirm the exact ratio, either 3.45 or 3.42, before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear mesh and carrier preload have to be set with measurement tools, so a gear shop is the usual installer. Break the new set in gradually, and check the ratio against your paperwork first.
What’s included
One ring and pinion set for the Ford 7.5 Inch rear axle, part number 2-2014-345.
Not included: Carrier bearings and shims are sold separately and may be needed for the ratio you install.
















