Overview
The G2 Axle and Gear 96-2049-DB is a rear disc brake conversion kit that replaces factory drum brakes with a bolt-in disc package. It is built for Dana 35, Dana 44 and Chrysler 8.25 inch housings found in Jeep vehicles.
The kit improves stopping power and includes an internal drum parking brake for better holding power. Fit is determined by axle housing rather than vehicle year, model or trim, so confirm your housing before ordering.
Key features
- Dual drilled rotors accept 5 on 4.5 and 5 on 5.5 inch bolt patterns
- Calipers and brackets for Dana 35, Dana 44 and Chrysler 8.25 inch housings
- Internal drum parking brake for holding power
- Includes all necessary hardware
- Natural finish
Parking brake and conversion planning
A drum-to-disc conversion changes how the rear brakes hold, but the parking brake has to be rebuilt to match. The internal drum parking brake in this kit works inside the rotor hat, so its shoes and adjuster need to be clean, free and correctly set after installation. Check that the rear wheels turn freely with the parking brake released.
Before you buy, check hub bolt pattern, housing type and brake line routing. Conversion work usually means bleeding the hydraulic system fully and checking the master cylinder against the new caliper volume. Replace worn hoses and fittings while the system is open, and inspect brake pads at every service interval.
- Confirm housing type before buying brackets
- Plan a parking brake cable and mounts
- Bleed the full brake system after installation
- Test parking brake holding on a slope
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 96-2049-DB |
| UPC | 805890652021 |
| Position | Rear |
| Bolt pattern | 5 on 4.5 and 5 on 5.5 |
| Rotor type | Drilled and slotted |
| Caliper type | Aftermarket |
| Parking brake | Internal drum |
| Color | Natural |
| Emergency brake cable | Sold separately |
Vehicle fitment
Fit is by axle housing: Dana 35, Dana 44 and Chrysler 8.25 inch housings found in Jeep vehicles. Confirm your housing type before ordering, since no year, model or trim applies to this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit swaps drum brakes for a bolt-in disc package, and the emergency brake cable must be bought separately, so plan for the parking brake cable before starting. Brake conversion work involves hydraulic and parking brake components, so a professional installer is a sensible choice.
What’s included
- Dual drilled rotors
- Calipers
- Brackets for the Dana 35, Dana 44 and Chrysler 8.25 inch housings
- Internal drum parking brake
- All necessary hardware
Not included: emergency brake cables, which are sold separately.



















