Overview
The G2 Axle and Gear 2-2095-513 is a 5.13 ratio ring and pinion for the front GM 8.25 Inch IFS axle. The pinion turns 5.13 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the front wheels and favors acceleration and low-speed pulling.
Built for oversized tires and high-performance engines with current materials and manufacturing methods. It is made for the front GM 8.25 Inch IFS axle, so verify the front housing before buying.
Key features
- 5.13 gear ratio for the GM 8.25 Inch IFS axle
- Front axle location
- Ring gear and pinion sold as a matched pair
- Designed for oversized tires and high-performance engines.
- Built with current materials and manufacturing.
Setting up a front gear swap
A front ring and pinion swap changes how the pinion depth, backlash and carrier preload fit together, so it is more than bolting in new gears. Before work starts, note the existing shim positions and bearing locations, and check that the carrier bearings and pinion parts match the housing on your vehicle.
A numerically high ratio like this one suits larger tires and low-speed work, and it pairs well with front axle upgrades that handle the extra torque. Inspect the front axle shafts, hub bearings and driveshaft angles while the carrier is out, since they are often replaced in the same job.
- Check front axle shaft and hub condition before reassembly
- Replace worn carrier bearings during the swap
- Recheck speedometer calibration after the ratio change
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2095-513 |
| UPC | 631410094794 |
| Axle type | GM 8.25 Inches IFS |
| Axle location | Front |
| Gear ratio | 5.13 |
| Axle manufacturer | GM |
Vehicle fitment
It is matched to the front GM 8.25 Inch IFS axle. Confirm that housing and its carrier on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front 5.13 set needs precise tooth contact and carrier preload, so a gear shop with setup tools is the usual choice. Plan on a break-in run before loaded use.
What’s included
One 5.13 ring and pinion set for the front GM 8.25 Inch IFS axle, part number 2-2095-513.
Not included: Check the package contents against your carrier, including bearings, shims and installation hardware, before starting the install.
















