Overview
The G2 Dana 44 3.54 Ratio Ring and Pinion, part number 2-2033-354, is a 3.54-ratio gear set for Dana 44 front or rear axles. It is one of G2’s ring and pinion sets.
The sets are engineered for demanding use and built to hold up to oversized tires and performance engines. They use current manufacturing technology and materials.
Key features
- 3.54 gear ratio
- Front or rear Dana 44 axle location
- Designed for demanding use and built to handle oversized tires and performance engines.
Break-in and setup
A new ring and pinion needs a controlled break-in before it carries loads. Early driving should be gentle, with light throttle and avoiding long pulls, so the tooth faces can seat evenly. Check for whine or a changing noise after the first few drives, since those sounds can point to a mesh or preload issue that needs a shop to correct.
Gear ratio changes affect how the axle behaves at speed, so think about tire size and the engine’s power before choosing a ratio. Setting the carrier bearings and pinion depth correctly matters as much as the gears themselves. Lubricant should be the type the axle requires and filled to the correct level, and changed on the schedule the axle needs.
- Break in gently for the first few drives
- Listen for whine after the initial miles
- Use the lubricant the axle requires
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-354 |
| UPC | 631410093940 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Gear ratio | 3.54 |
Vehicle fitment
It fits Dana 44 front or rear axles and is not tied to a specific vehicle. Check the carrier and axle housing before installing.
Installation notes
Mesh, backlash and pinion depth should be set by a shop with the right tools, and the gears should be run in before towing heavy loads.















