Select your vehicle

G2 Toyota 8 Inch 4.11 Ratio Ring and Pinion – 2-2041-411

G2 Axle and Gear

Shop G2 Axle And Gear Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Ring and pinion for the Toyota 8 Inch front axle
  • Gear ratio 4.11, part number 2-2041-411
  • Front axle location
  • Vehicle fitment not listed by model or year

Description

Overview

The G2 Axle and Gear 2-2041-411 is a 4.11 ratio ring and pinion for the front Toyota 8 Inch axle. The pinion turns 4.11 times for each full turn of the ring gear, a numerically high ratio that multiplies torque to the front wheels for larger tires.

The set is for the front Toyota 8 Inch axle. The Performance Ring and Pinion range is made for oversized tires and high-performance engines. Confirm that the front housing on your truck is an 8 inch unit before ordering.

Key features

  • 4.11 gear ratio for the Toyota 8 Inch front axle
  • Front axle location
  • Ring gear and pinion supplied as one matched set
  • Designed for oversized tires and high-performance engines.
  • Built with current materials and manufacturing methods.

Front axle considerations

A front axle carries steering and drive loads at the same time, so a gear swap there affects more than the differential. Check the front hub, the locking hubs if fitted, and the axle shafts for wear while the cover is off, because they are easier to service at the same time. Front differentials are also more exposed to water and mud, so the breather and seal condition deserve a look.

Gear mesh on a front 8 inch unit is sensitive to pinion depth and carrier preload. Setting those with proper tools keeps the gears quiet on the road. After installation, fresh gear oil and a short break-in period help the new teeth settle, and a check of the cover bolts after the first trail runs is a good habit.

Specifications

Brand G2 Axle and Gear
Part number 2-2041-411
UPC 631410094299
Axle type Toyota 8 Inch
Axle location Front
Gear ratio 4.11
Axle manufacturer Toyota

Vehicle fitment

This 4.11 set is for the front Toyota 8 Inch axle. Confirm that the front housing is an 8 inch unit and check the carrier before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Setting pinion depth and backlash on a front 8 inch Toyota gear set is specialist work, so most installers use a gear shop. Plan on a break-in run afterward.

What’s included

One 4.11 ring and pinion set for the Toyota 8 Inch front axle, part number 2-2041-411.

Not included: Carrier bearings, shims and hardware are not part of this set.

SKU: G/22-2041-411 Category:

Specification

Shipping weight 12.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Does the G2 2-2041-411 fit a Toyota 8 Inch front axle?

It is made for the front Toyota 8 Inch axle. Measure the housing and confirm the carrier before buying, along with your year, model and trim.

What does a 4.11 ratio do for a front axle?

The pinion turns 4.11 times per ring gear turn, multiplying torque to the front wheels. That helps with larger tires, at the cost of higher engine speed on the highway.

Are carrier bearings sold with this set?

Carrier bearings and shims are not included with the set. Match them to your front carrier before installation so the gears seat properly and the setup holds.

Are the front axle seals worth replacing during a gear change?

Often, yes. Replace the pinion seal and check the axle seals while the front differential is open, since a leak can contaminate new gears. Fresh gear oil at assembly also helps the new set break in.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop G2 Axle And Gear Ring And Pinions on Amazon