Select your vehicle

G2 Dana 44 3.73 Ratio Ring and Pinion – 2-2033-373

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Dana 44 3.73 ratio ring and pinion, part number 2-2033-373
  • Front or rear Dana 44 axle location
  • Made from computer heat-treated 8620 steel

Description

Overview

The G2 Dana 44 3.73 Ratio Ring and Pinion, part number 2-2033-373, is a 3.73-ratio gear set for Dana 44 front or rear axles. It is part of G2’s performance gear line.

G2 describes its ring and pinion sets as engineered for the most demanding applications and says they use the latest technology and materials.

Key features

  • 3.73 gear ratio
  • Front or rear Dana 44 axle location
  • Made from computer heat-treated 8620 steel.

Gear mesh and setup

A ring and pinion set changes the final drive ratio, which affects engine speed at a given road speed. A numerically higher ratio can help a vehicle with larger tires or heavier loads pull more easily, but it also raises engine rpm at highway speed. Match the ratio to your tire size and how you drive.

Gear mesh and pinion depth decide how long the set lasts. A tooth contact pattern that is off can wear quickly or make noise. Setup takes specialty tools and careful shimming, so a qualified gear shop is the usual choice for most owners.

  • Replace the pinion bearings and seal with the gears
  • Use the gear oil type the axle calls for
  • Check the carrier bearings for wear before installing
  • Inspect the axle shafts and bearings during the rebuild

Specifications

Brand G2 Axle and Gear
Part number 2-2033-373
UPC 631410093957
Axle type Dana 44
Axle location Front or rear
Gear ratio 3.73
Gear material Computer heat-treated 8620 steel

Vehicle fitment

It is for Dana 44 front or rear axles. Confirm the axle and carrier before installing.

Installation notes

A 3.73 set needs careful mesh and preload settings, so it should go in with a shop that does ring and pinion work.

SKU: G/22-2033-373 Categories: ,

Specification

Shipping weight 14.30 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Is the 2-2033-373 a 3.73 ratio?

Yes. It is a 3.73 ratio ring and pinion for Dana 44 front or rear axles, made from computer heat-treated 8620 steel.

Which axle is the 2-2033-373 for?

The set is for Dana 44 front or rear axle locations. Confirm the axle housing before ordering, since it fits by axle type rather than by vehicle.

Is the 2-2033-373 a front reverse set?

No. The 2-2033-373 is for front or rear locations. The front reverse version is a separate part, 2-2033-373R, so order that part for a reverse front set.

What else is usually replaced with a ring and pinion?

Pinion and carrier bearings, the pinion seal and the differential fluid are often replaced with a new ring and pinion. Installers usually check the axle bearings and carrier shims at the same time. Fresh gear oil should go in after the break-in period.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon