Overview
The G2 Axle and Gear 98-2032-002 is a Dana 30 front chromoly axle kit with 27 splines for 1982–1986 Jeep CJ5, CJ7 and Scrambler models with the wide track front axle.
This kit is a chromoly replacement for the factory front shafts on wide track CJs. It uses a 5-760X joint and has 27 splines. No differential is included. The chromoly axles are forged from 4340 alloy, with extra material around the U-joint cap to help the yoke resist distortion.
The 27 spline count matches what many stock Dana 30 front differentials use, so this version is aimed at owners keeping the existing differential. The chromoly shafts are meant to tolerate more punishment than the factory ones, with G2 pointing to extra material around the U-joint cap to prevent distortion that can damage bearings. The 5-760X joint named by G2 is part of the match, so owners should confirm the joint style on their axle first.
Key features
- Dana 30 front axle kit in chromoly
- 27 splines
- Uses a 5-760X joint
- No differential included
- Extra yoke material around the U-joint cap helps it resist distortion.
- Wide track CJ application
Matching the spline count
Spline count is the first thing to check when a front axle is rebuilt, because the shaft and the differential side gear must mesh. A 27 spline shaft will not properly engage a differential built for a different count, so counting the splines on the existing differential prevents a wrong purchase. Wide track CJ axles often keep their original differential, which makes this check worth doing early.
Chromoly shafts with a reinforced yoke area suit owners who run bigger tires or steep trail routes, where the axle sees more torque than the original design. Replace the U-joint and check the clips at the same time, since a worn joint can damage a new shaft. Inspect the housing for oil seepage and cracks while the axle is open.
- Count the splines on the existing differential
- Check the U-joint style before buying
- Inspect the housing for cracks while it is open
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2032-002 |
| UPC | 631410097467 |
| Part type | Front axle kit |
| Material | Chromoly (4340 alloy) |
| Axle | Dana 30 |
| Axle location | Front |
| Spline count | 27 splines |
| U-joint | 5-760X |
| Track width | CJ wide track |
| Differential included | None |
Vehicle fitment
It fits the 1982–1983 Jeep CJ5, the 1982–1986 Jeep CJ7 and the 1982–1985 Jeep Scrambler.
Narrow track CJs from 1981 and earlier and the CJ6 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since no differential comes with the kit, the shafts have to match the splines of the differential already in the axle. Confirm the count before installing.











