Overview
The G2 Axle and Gear 97-2032-009 is a chromoly passenger-side front inner axle shaft for the Dana 30 in the 1982–1986 Jeep CJ5, CJ7 and Scrambler. It has 30 splines and accepts a 5-760X U-joint.
Forged high-grade alloy steel makes up the shaft, which is heat treated beyond OEM specifications. The shaft is machined to accept full circle clips.
The 97-2032-009 is a passenger-side chromoly inner shaft with 30 splines for the standard Dana 30 in 1982–1986 CJ models. It accepts a 5-760X U-joint and is machined for full circle clips. It is forged from high-grade alloy steel and heat treated beyond OEM specifications.
Key features
- Chromoly inner axle shaft for the Dana 30
- 30 splines
- Accepts a 5-760X U-joint
- Machined for full circle clips
- Passenger-side inner shaft
- Front axle
Replacing shafts in pairs
Inner shafts on a Dana 30 take the same load on both sides, so a shaft that has worn on one side often means the other is close behind. When one passenger-side shaft fails, checking the driver side at the same time avoids a second breakdown on the trail. Matching the age and wear of both halves keeps the axle balanced under power.
Before installing the passenger-side shaft, confirm the U-joint and retainer are in good condition and that the joint angle will sit correctly. Recheck the clip after the first few drives, since a shaft that has not fully seated can creep out of position. Retorque any fasteners you disturbed during the job.
- Inspect the driver-side shaft at the same time
- Confirm the U-joint angle before closing up
- Recheck the clip after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2032-009 |
| UPC | 631410097115 |
| Product type | Replacement axle shaft |
| Axle type | Dana 30 Standard |
| Axle location | Front |
| Shaft position | Passenger Side Inner |
| Spline count | 30 |
| Material | Chromoly |
| U-joint | 5-760X |
| Axle end | Machined for full circle clips |
| Stated application | 82-86 Jeep CJ |
Vehicle fitment
It fits the 1982–1983 Jeep CJ5, the 1982–1986 Jeep CJ7 and the 1982–1985 Jeep Scrambler.
The CJ7 runs through 1986, but the Scrambler stops at 1985 and the CJ5 at 1983. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check the U-joint is the 5-760X type before fitting the 97-2032-009.
- The 30-spline shaft has to match your Dana 30 gears.
What’s included
One passenger-side inner axle shaft (97-2032-009).
Not included: the outer shaft, U-joint and clips for the 97-2032-009.





