Overview
The G2 Axle and Gear 95-2021-008 is a replacement rear axle shaft for GM 10 bolt axles in the 8.5 inch and 8.2 inch axle types. It fits the driver or passenger side and has 28 splines.
G2 describes forged alloy steel construction, heat treatment beyond OEM specifications, and rolled splines for high torque work. Big Spline options are also mentioned for larger tire setups.
Key features
- Forged high grade alloy steel construction
- Heat treated to exceed OEM specifications
- Rolled splines with better materials for high torque
- Big Spline options named for larger tires
- 28 splines per shaft
Shaft wear signs
Shaft wear usually shows up at the spline ends first. Look for rounded teeth, small cracks near the splines, or discoloration from heat. A shaft with play at the wheel or a clicking sound on turns may need attention, especially if the axle has been driven under heavy loads or with larger tires.
Check the components around the shaft while it is out. The axle bearing and seal keep lubricant in and grit out, and damage to either can shorten the life of a new shaft. Keep the old parts for comparison and match the axle type and 28 spline count before choosing a replacement.
- Check the spline teeth for rounding
- Look for cracks near the spline ends
- Inspect the bearing and seal before reassembly
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2021-008 |
| UPC | 631410106183 |
| Axle types | GM 10 bolt 8.5 inch and GM 8.2 inch |
| Axle location | Rear |
| Shaft location | Driver or passenger |
| Spline count | 28 splines |
| Material | High grade alloy steel |
Vehicle fitment
G2 names no make, model, year or chassis code for this shaft. Fitment is given as Universal Fit, with two axle types listed.
Verify your housing’s axle size against the 8.5 inch and 8.2 inch types above before you select it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by identifying which of the two named axle types your housing uses, then check the 28 spline count on the shaft you are replacing. Support the vehicle securely on stands before working beneath it.
What’s included
This covers one shaft for one side of the axle. Check bearings, seals and fasteners against your installation before starting.







