Overview
The G2 Dana 44 3.73 O.E.M. Ratio Ring and Pinion, part number 1-2033-373, is a 3.73-ratio gear set for Dana 44 front or rear axles. It belongs to G2’s O.E.M. series.
The O.E.M. series is designed to run cooler and quieter than aftermarket gears. These gears are made under contract with original equipment manufacturers and match the gears fitted at the factory.
Key features
- 3.73 gear ratio
- G2 O.E.M. series design
- Front or rear Dana 44 axle location
- Made under contract with original equipment manufacturers.
Quiet running and setup
Ring and pinion noise often comes from mesh, backlash, and bearing preload rather than the gear design, so setup matters as much as the part. Quiet running depends on the tooth contact pattern, which a shop checks with marking compound before final assembly.
Gear noise can also change with tire size, road surface, and load. A whine that rises and falls with speed points to the gears, while a clunk on acceleration may point to backlash or driveline wear. Take the time to diagnose before replacing additional parts.
O.E.M. series gears suit owners who want a factory-style feel, but comparing carrier condition and bearing age is still worthwhile. Replace worn carrier bearings and the pinion seal while the axle is open, and check gear oil after the break-in period for metal particles.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2033-373 |
| UPC | 631410092967 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Gear ratio | 3.73 |
| Series | O.E.M. |
Vehicle fitment
It fits Dana 44 front or rear axles and is not tied to one vehicle. Confirm the axle location and carrier before installing.
Installation notes
Ring and pinion gears need professional setup for mesh, backlash and bearing preload, followed by a break-in period.














