Overview
The G2 Axle and Gear 2-2043-529 is a 5.29 ratio ring and pinion for the rear Toyota 8 Inch V6 axle. The pinion turns 5.29 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels and favors acceleration and low-speed pulling.
The set is for rear Toyota 7.5 Inch or 8 Inch axles. The V6 designation does not identify a particular vehicle, so measure the ring gear and confirm the housing before ordering. The Performance line is made for oversized tires and high-performance engines.
Key features
- 5.29 gear ratio for the rear Toyota 8 Inch V6 axle
- Rear axle location
- Ring gear and pinion supplied as one set
- Made for oversized tires and high-performance engines.
- Built with current materials and manufacturing.
Ring gear and carrier checks
Rear gears on a Toyota axle need a clean ring gear face and a carrier that is solid before any new set goes in. Look for cracks, galling and uneven wear on the carrier, and make sure the bearing caps seat fully. Those checks take little time and prevent a noisy result.
A 5.29 ratio favors acceleration and low-speed pulling, so it suits heavier loads and larger tires. Highway cruising runs at higher rpm, which can be tiring on long trips. Choose the ratio around the way the vehicle is used most of the time.
After installation, check the cover bolts and gear oil level after the first few runs. Watch for metal flakes in the oil, and inspect the axle seals for leaks during the break-in period.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2043-529 |
| Axle type | Toyota 7.5 Inches or Toyota 8 Inch |
| Axle location | Rear |
| Gear ratio | 5.29 |
| Axle manufacturer | Toyota |
Vehicle fitment
This 5.29 set is for rear Toyota 7.5 Inch or 8 Inch axles. Measure the ring gear and confirm the housing on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.29 set needs precise pinion depth, backlash and carrier preload, so a gear shop with setup tools is the usual installer. Allow a break-in period before heavy loads.
What’s included
One 5.29 ring and pinion set for the rear Toyota V6 axle, part number 2-2043-529.
Not included: This set does not include carrier bearings, shims or hardware.














