Overview
The G2 Axle and Gear 2-2027-411 is a 4.11 ratio ring and pinion for the Chrysler 8 Inch IFS front axle. IFS stands for independent front suspension, so this is a front-axle gear set. The pinion turns 4.11 times for each ring gear revolution, a numerically high ratio that boosts torque to the front wheels.
The set fits the front Chrysler 8 Inch IFS axle. Its design centers on oversized tires and high-performance engines, with current materials and manufacturing. Vehicle models and years are not identified, so confirm the front 8 inch housing on your vehicle before buying.
Key features
- 4.11 gear ratio for the Chrysler 8 Inch IFS front axle
- Front axle location
- Ring gear and pinion supplied as a matched set
- Built for oversized tires and high-performance engines.
- Made with current materials and manufacturing.
Front axle considerations
Front gears change more than wheel speed. The pinion and ring gear sit inside a steering-axle housing that also carries the drive shaft, so setting depth and backlash is tighter work than on a rear axle. A numerically high gear like this one multiplies torque to the front wheels, which can help with larger tires and steep climbs, but it also raises engine rpm at highway speed.
Front axle wear shows up in the front carrier, the axle shafts and the joints. Check for play in the front driveline, leaks at the carrier seal and rough noise under load. Renewing the carrier bearings during a gear swap is common practice, and it keeps the new teeth in proper mesh.
- Measure pinion depth before assembly
- Inspect the front driveline joints
- Replace the carrier seal during the swap
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2027-411 |
| UPC | 631410093735 |
| Axle type | Chrysler 8 Inches (IFS) |
| Axle location | Front |
| Gear ratio | 4.11 |
| Axle manufacturer | Chrysler |
Vehicle fitment
Fitment is not tied to specific vehicles. The 4.11 set is a front 8 inch IFS ring and pinion, so confirm that the front axle on your vehicle is the 8 inch IFS unit before ordering. Any other Chrysler housing size needs its own fit check before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front gear sets involve pinion depth, backlash and bearing preload, and the front carrier is usually harder to access than a rear. A gear shop with setup tools is the practical installer.
What’s included
One 4.11 ring and pinion set for the Chrysler 8 Inch IFS front axle, part number 2-2027-411.
Not included: Carrier bearings, shims and installation hardware are not part of this set and need separate purchase.
















