Overview
Part MHTD61518909850 is an 18×9 inch aluminum spoke wheel from FUEL Off-Road’s Contra D615 line, finished in black and milled. It lists two bolt patterns: 6 on 135/6 on 5.5 and 6 on 135.
Offset is 1, backspacing is 5 and the center bore is 106. Those figures should be compared with your hub before mounting, and the fitment entry is universal fit with no vehicle named.
Key features
- 18 inch diameter and 9 inch width
- Two bolt pattern entries
- Spoke style
- Center bore 106
- Offset 1 and backspacing 5
- Black and milled finish, aluminum construction
Checking the hub before mounting
Start by cleaning the hub face and the back of the wheel. Rust, paint flakes and grit can make the wheel sit slightly off, which may loosen lug nuts over time. Use a wire brush, then wipe the surfaces dry so the mounting contact is solid.
Look over the studs for bent threads, rust or damage, and replace any that look compromised. Confirm that the lug nut seats match the wheel’s seat style before tightening. Tighten in a star pattern, then recheck the torque after a short drive. Inspect the wheel after the first few trips for vibration or fender contact.
If the hub bore and bolt pattern both match, the mounting is more likely to stay true, but both checks are needed before each wheel change. Keep a record of when the lug nuts were last checked.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD61518909850 |
| Model | Contra D615 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135/6 on 5.5 |
| Second bolt pattern | 6 on 135 |
| Offset | 1 |
| Center bore | 106 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the only fitment entry, so the wheel is not tied to a year, make, model or trim. Confirm both listed bolt patterns and the 106 bore against the hub before buying.
This spoke wheel is not confirmed for any specific truck or SUV. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the hub bore is compatible with 106 before mounting, and confirm the bolt pattern entry that matches your hub. Test full steering lock for fender and brake contact.
What’s included
The scope is the wheel alone; sort out other mounting parts ahead of time.
Not included: a tire, which must be arranged separately.











