Overview
The FUEL Off-Road Rogue D710 is a 20×10 aluminum spoke wheel with an 8 on 170 bolt pattern, part number MHTD71020001747, in a platinum finish. It is designed for trucks and SUVs with an 8-lug 170 bolt pattern, and its -18 offset sets the wheel further out toward the fender.
The platinum finish gives the spoke face a light, metallic look. The 125 center bore and 4.8 backspacing should be compared with your hub and inner fender clearance before the wheel is mounted on any vehicle.
Key features
- 20-inch diameter with a 10-inch wide rim
- 8 on 170 bolt pattern
- Platinum finish
- Spoke design in aluminum construction
- Offset -18, backspacing 4.8 and center bore 125
- Part of the FUEL Off-Road Rogue D710 line
Lug nuts and seating
Lug nuts have to match the wheel’s seat shape, either conical, ball or flat, or the wheel will not clamp evenly. Using the wrong seat can crush the hole edges and loosen the wheel over time. Check the seat style on the new wheel before buying hardware, and confirm the thread pitch and length suit your studs. Hub-centric fit also helps reduce vibration, since the center bore centers the wheel on the hub instead of the lugs alone.
Seating problems often come from rust, paint or debris on the mounting face. Clean the hub face and the back of the wheel before installing, and keep the lug nut threads free of grease that could change torque readings. Tighten in a star pattern, recheck after the first few drives and inspect the studs for stretching or thread damage during each service.
- Match lug seat shape to the wheel
- Clean the hub and wheel contact surfaces
- Retorque after the first few drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD71020001747 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Offset | -18 |
| Backspacing | 4.8 |
| Center bore | 125 |
| Bolt pattern | 8 on 170 |
| Style | Spoke |
| Finish | Platinum |
| Construction | Aluminum |
Vehicle fitment
This wheel is universal fit and is not built for one named vehicle. The 8 on 170 bolt pattern and 125 center bore must match your hub, since a universal fit wheel still needs an exact pattern match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 8 on 170 bolt pattern and 125 center bore to your hub, and check that the -18 offset clears brake calipers. A wheel that does not seat squarely can loosen, so confirm the mounting face is clean before installing.
What’s included
The wheel is sold alone, without tires, lug nuts or center caps.
Not included: tires, lug nuts and center caps.











