Overview
The Contra D615 18×9 spoke wheel from FUEL Off-Road carries part number MHTD61518909845 and a black and milled finish. It is listed with 6 on 135/6 on 5.5 and a second entry of 6 on 135.
Offset is -12, backspacing is 4.6 and center bore is 106, so the wheel’s mounting position and hub bore need measuring before fitting. Universal fit is the only fitment stated.
Key features
- 18 inch diameter and 9 inch width
- Bolt patterns 6 on 135/6 on 5.5 and 6 on 135
- Spoke style
- Center bore 106
- Offset -12 and backspacing 4.6
- Black and milled finish, aluminum construction
Hub bore and centering
The center bore is the hole that sits over the hub. A bore that matches the hub centers the wheel on the hub itself, so the lug nuts carry only clamping load. When the bore is larger than the hub, a centering ring may be needed. Check the hub diameter with calipers before the wheel goes on, and do not force a wheel that does not seat flat.
Two bolt patterns in one setup means only one pattern will match the hub, so confirm which one before buying. Keep the mounting face clean and free of rust, and wipe away old anti-seize residue. Torque the lug nuts in a star sequence and recheck them after the first few drives, especially with spokes that have shallow seats.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD61518909845 |
| Model | Contra D615 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135/6 on 5.5 |
| Second bolt pattern | 6 on 135 |
| Offset | -12 |
| Center bore | 106 |
| Backspacing | 4.6 |
| Style | Spoke |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
No year, make, model or trim is attached to this wheel, and the fitment entry reads universal fit. Use the listed bolt patterns and the 106 center bore as your check points against the hub.
No truck or SUV is confirmed for this spoke wheel; verify year, model and trim first.
Installation notes
The 6 on 135 entry is listed separately, so confirm it against the hub before mounting. Measure the hub bore against 106 and check fender clearance with the wheel turned to full lock.
What’s included
This covers the wheel alone; plan any other mounting parts before you start.
Not included: a tire, which must be mounted separately.











