Overview
The ICON Delta Joint Tubular Upper Control Arm Kit, part number 58460DJ, is a front upper tube arm kit for the 2007 to 2021 Toyota Tundra. It fits 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims, so match your trim before ordering.
The arms are CNC bent from 1026 DOM steel tubing with a semi-gloss black powder coat that adds corrosion resistance. They have built-in caster correction for alignment and steady handling. Check the package contents against your installation before starting, since bushings and hardware may differ by kit.
Paired with ICON’s 2.5 or 3.0 series coilovers, these arms can increase wheel travel on the Tundra, which supports better performance and ride quality. Coilovers are not part of this kit and need to be bought separately.
The Delta Joint is patent pending and built as a heavy duty high angle ball joint. It has a zinc plated housing and a grease seal, and its greasable metal on metal construction supports long life and quiet operation.
Key features
- CNC bent 1026 DOM steel tubing
- Semi-gloss black powder coat
- Built-in caster correction.
- Patent pending Delta Joint
- Zinc plated housing and grease seal
Tundra upper arm checks
On a Tundra, upper arms carry braking and cornering loads at the top of the front suspension, so a proper fit matters as much as strength. Before replacing them, support the truck safely and compare the old arms with the new ones, looking at the frame mounts, the ball joint stud and the bushing locations. Trucks that tow or run rough trails tend to show joint wear sooner, so inspect them on a regular schedule.
Pairing new arms with coilovers or upgraded shocks changes how the suspension behaves, so consider the complete setup rather than one part. Check shock length and mounts against the new travel range. Plan a wheel alignment after any arm swap, then recheck the fasteners after the first few drives.
- Inspect joints for play and torn seals
- Compare mounting points before removing old arms
- Recheck fasteners after the first drives
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 58460DJ |
| Position | Front upper |
| Type | Tube |
| Material | 1026 DOM steel |
| Finish | Semi-gloss black powder coat |
| Joint | ICON Delta Joint, patent pending |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2021 Toyota Tundra models, including 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims.
Tundra trims not named in the fitment, and Tacoma and 4Runner models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The arms have built-in caster correction, so check the alignment once they are in. Verify your Tundra year and trim before you order.
What’s included
Tubular upper control arm kit.


