Overview
The Fabtech K1046 is a 6-inch RTS lift for the 2011–2018 GMC Sierra 2500 HD. The RTS system keeps the torsion bars raised in their stock location with patent pending brackets, and the front uses crossmembers, steering knuckles and torsion bar drops. Lift blocks with U-bolts handle the rear.
The raised torsion bars give more ground clearance at the frame, because no torsion bars hang low where they could be high centered or damaged off road. The unitized brackets shorten installation and add strength. Front and rear twin tube performance shocks are included, along with bump stop relocation brackets and a differential skid plate.
The bump stop relocation brackets are part of the kit, so the bump stops move with the raised torsion bars during installation. The front differential skid plate is 1/4-inch thick steel and guards the front differential on the lifted truck.
The RTS system keeps the torsion bars from hanging low, so the front is built for ground clearance at the frame.
Key features
- 6-inch lift height, range 5 to 6.99 inches
- Torsion bars kept in the stock location
- Front and rear twin tube performance shocks
- Bump stop relocation brackets
- 1/4-inch steel differential skid plate
- Unitized brackets
Before you buy
Raised torsion bars change how the front suspension moves, so the RTS setup is best judged by the way the truck will be driven. Trucks used mostly on pavement will feel the new ride height most in cornering and braking. Trucks that crawl or cross rough ground gain the most from the extra clearance at the frame, since the bars stay out of harm’s way.
Check the front differential, carrier bearing and driveshaft angles after installation. A raised front can change driveshaft angles and cause vibration at highway speed, so a road test is worth doing before a long trip. Inspect the skid plate mounting points after rough trail use.
- Look over bump stop brackets after the first trip
- Recheck shock mounting bolts after the first trip
- Keep spare fasteners on hand
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1046 |
| UPC | 70000552917 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Front components | Crossmember, steering knuckles, torsion bar drops |
| Rear lift method | Lift blocks with U-bolts |
| Shocks | Front and rear twin tube performance shocks |
| Included parts | Bump stop relocation brackets and differential skid plate |
Vehicle fitment
It fits the 2011–2018 GMC Sierra 2500 HD only. Chevrolet Silverado and 3500 models are not covered.
The list covers the GMC Sierra 2500 HD only, so the Chevrolet Silverado and the 3500 models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes bump stop relocation brackets and a differential skid plate along with the torsion bar drops. Check those parts against the truck before starting the job.
What’s included
Front crossmember, steering knuckles, torsion bar drops, bump stop relocation brackets, a differential skid plate, lift blocks with U-bolts, and front and rear twin tube performance shocks.










