Overview
The Fabtech K2120DL is a 6-inch 4-link lift with Dirt Logic SS shocks. It fits the 2008–2015 Ford F-250 Super Duty and the 2014 Ford F-350 Super Duty. The arms replace the factory arms directly, and the arm design eliminates the upper ball joint.
The arms use a 1-inch ID stainless American Uniball that sits in the factory ball joint taper, and the 4340 heat-treated Uniball pin needs no spindle change. The chromoly tubing reduces flex, and the arms carry added caster for alignment. The system works with Dirt Logic 2.5 coilover shocks for more wheel travel and fits factory aluminum suspension vehicles only.
The 4-link layout locates the axle with four links, and the arms replace the stock arms directly at the front.
Dirt Logic 2.5 coilover shocks are used for the extra wheel travel, and Dirt Logic SS shocks come with the kit.
Key features
- 6-inch lift, range 5 to 6.99 inches
- Upper ball joint eliminated by the arm design
- 1-inch ID stainless American Uniball
- Chromoly tubing
- Added caster built into the arms
- Dirt Logic SS shocks included
Arm bushings and alignment
Four-link arms locate the axle fore and aft, so the bushings and Uniball joints carry most of the forces during acceleration and braking. Because the arms also set caster, a change in their condition shows up as wander, pull or uneven tire wear. Check the joints and mounting hardware at each service and after hard use.
Shock and coilover choices change how the axle moves across its travel. Dirt Logic SS shocks suit the kit as supplied, while a coilover setup on the same arms needs its own check of clearance and bump stops. Keep the spring, shock and arm geometry consistent when upgrading any one part.
Off road, the links and Uniball pins see side loads and twisting, so look for cracked welds, bent links and any play in the pins. Re-check the bolts after the first few trail runs and keep the tires at the right pressure to reduce strain on the joints.
- Inspect Uniball pins for play at each service
- Check link welds for cracks after rough trail use
- Re-torque mounting bolts after the first trail runs
- Confirm caster after any alignment change
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2120DL |
| UPC | 700007272871 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | 4-link |
| Uniball | 1-inch ID stainless American |
| Tire and wheel fit | 295/70R17 on 17×8, 275/65R18 on 18×8, 285/55R20 on 20×9; 4 1/2-inch and 5-inch backspacing |
| Shocks | Dirt Logic SS shocks included |
Vehicle fitment
It fits the 2008–2015 Ford F-250 Super Duty and the 2014 Ford F-350 Super Duty.
It fits factory aluminum suspension only, and AutoRide shocks, all-wheel drive and standard cab trucks are excluded. The 2014 F-350 fit applies to trucks with factory aluminum suspension. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check the factory suspension for the aluminum or steel version before installing. The OEM wheel and tire cannot be used with this kit.
What’s included
4-link arms with Uniball pins, the Dirt Logic SS shocks and the hardware for the kit.









