Overview
The Fabtech FTS22249 is a set of 4 inch lift coil springs for the Ford F-250 and F-350 Super Duty. The springs are American made hot wound coils, and each one is preset during manufacture so the ride height does not settle over time.
The coils are designed for a compliant ride on and off road. The springs are also a component of Fabtech kits K2292DL and K2291DL.
Key features
- 4 inch lift coil springs
- American made hot wound coils
- Each coil preset during manufacture to prevent ride height settling
- Designed for a compliant ride on and off road
- Gives extra wheel travel over stock when used with Fabtech shock absorbers.
Before you buy coil springs
A coil spring sets the front ride height and carries part of the truck’s weight, so a lift with new coils changes how the suspension sits at rest. Before buying, match the spring to your truck’s model year, cab and engine, and confirm whether steering, brakes and driveline need inspection after the height changes. Shock absorbers, bump stops and track bar hardware often get replaced at the same time, because they work with the springs to control movement.
Coil springs wear slowly, but sagging, cracked coil faces or uneven height from side to side are signs the old springs have lost their rating. Inspect the old springs for corrosion before removing them, and check the upper and lower spring seats for damage. Plan a full alignment once the new springs are installed, and recheck torque on suspension fasteners after the first few drives.
- Check fender and wheel clearance at full steering lock
- Inspect shock mounts and bump stops
- Re-torque fasteners after the first few drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22249 |
| UPC | 674866104679 |
| Lift | 4 inch |
| Spring type | Hot wound coil |
| Made in | United States |
Vehicle fitment
It fits the 2017 Ford F-250 Super Duty and 2017 Ford F-350 Super Duty across the covered trim levels.
Confirm fit for your truck’s model year, model and trim before ordering.
What’s included
The kit contains the coil springs. The springs are also a component of Fabtech kits K2292DL and K2291DL.









