Overview
The Fabtech K1083M is a 6-inch Basic GEN II lift kit with rear Stealth shocks for the Chevrolet Silverado 1500 and GMC Sierra 1500 from 2014 to 2015 and 2017 to 2018. The lift height range is 6 to 7 inches, and the fitment is direct.
Confirm the component list and shock package with Fabtech before ordering. A 6-inch lift changes suspension geometry, so review the included parts against your truck’s setup before starting.
Key features
- 6-inch Basic GEN II design
- Rear Stealth shocks
- Lift height range of 6 to 7 inches
- Direct-fit listing for 2014–2015 and 2017–2018 1500 trucks
Measuring lift and setting ride height
Lift height is best measured from a fixed point, such as the wheel center to the fender edge, before and after installation. Take the readings on level ground with the truck unloaded, so the numbers are comparable. Small differences often come from tire pressure and the load in the bed.
Ride height affects alignment, driveline angles and bump stop contact. Recheck those after the lift is complete and after any change in tire size. Settling in the first weeks is common, so repeat the measurements after a short break-in period. A simple record of measurements helps catch sag or uneven settling early.
- Measure on level ground with the truck unloaded
- Record measurements before and after installation
- Check bump stop contact at full compression
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK1083M |
| Lift height range | 6 to 7 inches |
| Rear shocks | Stealth |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2014 to 2015 and 2017 to 2018 Chevrolet Silverado 1500 models in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and GMC Sierra 1500 models in the Base, Denali, SLE and SLT versions.
The 2016 model year is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6-inch lift changes suspension geometry, so a wheel alignment and a driveline angle check belong after installation.
What’s included
Check the box contents against part number FABK1083M before installing.









