Overview
The Fabtech K1159M is a 6-inch RTS lift kit with Stealth front and rear shocks for the Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD. It also covers 2020 and 2021 Silverado 3500 HD and Sierra 3500 HD models. The lift height range is 6 to 7 inches, and the kit is designed to clear 37-inch tires.
The kit is built to improve off-road capability while keeping a smooth highway ride, and it keeps the truck’s factory load carrying capacity. That suits owners who tow and haul. The RTS design is a bracket system that keeps the torsion bars in their factory location while still providing lift.
Key features
- RTS bracket system that keeps the torsion bars in the factory location
- Torsion bars do not hang low, which Fabtech says improves ground clearance at the frame
- Arched lower control arm crossmembers for ground clearance
- 1/4-inch steel skid plate protecting the front differential
- Crossmembers and bracketry built from 1/4-inch steel
- Stealth front and rear shocks
- Rear lift block
Why torsion bar position matters
Torsion bars set the front ride height in many trucks, and moving them changes the front suspension geometry. An RTS bracket system holds the bars where the factory placed them, which keeps the front end’s load path close to stock. That approach limits the parts that must change to achieve the lift.
Heavier trucks used for towing rely on consistent front and rear support, so check the condition of the frame, skid plate mounts and control arm bushings after the install. Recheck the drop from the rear block once the truck has been loaded and unloaded a few times. Keep the rear block fasteners tight, since they carry the rear lift loads.
- Inspect control arm bushings after installation
- Check the rear block fasteners for torque
- Confirm the skid plate is secure after rough trails
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK1159M |
| Lift height range | 6 to 7 inches |
| Front shocks | Stealth |
| Rear shocks | Stealth |
| Rear lift method | Block and spacer |
| Crossmembers and bracketry | 1/4-inch steel |
| Drilling | Four holes; front differential housing not cut |
| Tire options | 37/12.50R18 on 18×9, 37/12.50R20 on 20×9, 37/12.50R22 on 22×9; all with 5 3/4-inch backspacing and minor trimming |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2020 to 2026 Chevrolet Silverado 2500 HD models in the Custom, High Country, LT, LTZ and WT versions, 2020 to 2021 Silverado 3500 HD models in the LT and LTZ versions, 2020 to 2026 GMC Sierra 2500 HD models in the AT4, Base, Denali, SLE and SLT versions, and 2020 to 2021 Sierra 3500 HD models in the Base, SLE and SLT versions.
Both 2500 HD and 3500 HD trucks are covered in the years and versions above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only four holes need drilling, and the front differential housing does not need cutting. The 6-inch lift changes front geometry, so an alignment and a driveline angle check belong after installation. The tire options carry a minor trimming note.
What’s included
The kit includes the RTS bracket system, the arched lower control arm crossmembers, the 1/4-inch steel skid plate, the Stealth front and rear shocks and the rear block.










