Overview
The Fabtech K1084 is a 6-inch Gen II basic lift with rear performance shocks for the 2014–2015 and 2017–2018 Chevrolet Silverado 1500 and GMC Sierra 1500. The system keeps the factory track width, which keeps the tires under the fenders. It fits 2014 models with factory aluminum suspension only.
The front sway bar keeps the stock end links and mounting holes, so the leverage on the bar stays as the factory set it. No CV spacers, impact struts or add-a-leafs are needed. The front differential is relocated to reduce vibration at higher four-wheel drive speeds, and the lift uses an upper coilover spacer that lifts from the top of the shock. Rear shocks are performance twin tubes. The bracketry and skid plate are 1/4-inch thick steel.
Key features
- 6-inch lift height, range 5 to 6.99 inches
- Factory track width retained
- Stock front sway bar end links and mounting holes
- Upper coilover spacer that lifts from the top of the shock
- Performance twin tube rear shocks
- 1/4-inch thick steel bracketry and skid plate
Checking the sway bar after install
A lift changes the geometry of the front and rear axles, so the sway bar, steering and driveline all need a look once the truck is up. Stock end links that stay in place mean the bar works at its factory angle, but a change in ride height can still alter how the bar loads the suspension. Look at the end links and bushings for wear, and make sure the bar moves freely when the wheels articulate.
Upper coilover spacers add height at the top of the shock, so the shock body and its mounts carry more load over time. After the first few trail runs, re-check the spacer bolts, skid plate fasteners and U-bolts, since rear lift blocks can settle as the springs seat.
- Re-torque U-bolts after the first drive
- Inspect sway bar end links for play
- Check front differential vent and driveline angles
- Look for rubbing at full steering lock
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1084 |
| UPC | 700007073721 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Rear lift method | Lift blocks and U-bolts |
| Tire and wheel fit | 35/12.50R17 on 17×8, 325/65R18 on 18×9, 35/12.50R20 on 20×9; 5-inch backspacing, minor trimming |
| Bracketry and skid plate | 1/4-inch thick steel |
| Shocks | Performance twin tube rear shocks |
Vehicle fitment
The K1084 fits the 2014–2015 and 2017–2018 Chevrolet Silverado 1500 and the 2014–2015 and 2017–2018 GMC Sierra 1500.
It fits 2014 models with factory aluminum suspension only. It does not fit models with Factory AutoRide shocks, all-wheel drive models or standard cab trucks. Confirm the year, model and trim against your truck before ordering.
Installation notes
Because the sway bar keeps its stock end links, check the bar geometry after installation. The kit passes FMVSS 126 for stability control functions, as tested by an independent lab.
What’s included
Upper coilover spacers, the Gen II bracketry and 1/4-inch steel skid plate, the front differential relocation parts, the rear lift blocks with U-bolts and the performance twin tube rear shocks.









