Overview
The Fabtech K2166 is a 3-inch spindle lift for the 2001–2008 Ford Ranger, built for 2WD trucks with coil spring front suspension. The rear uses a lift block, U-bolts and an add-a-leaf. Shocks are not included with the kit.
The spindle system is designed for coil spring front suspension, and the alignment cam and bolt kit are part of the package. The lift height range is 3 to 4.99 inches, and the front alignment is set after the spindles are installed.
Key features
- 3-inch lift, range 3 to 4.99 inches
- Spindle system for coil spring front suspension
- Alignment cam and bolt kit
- Rear lift block, U-bolts and add-a-leaf
Things to check
A spindle system for coil spring front suspension lifts the front end by changing the knuckle position, so the coil springs and shocks work at a new height. The rear add-a-leaf and lift block raise the back to match. Keeping front and rear lift roughly balanced helps the truck drive level and keeps the driveline and brake lines from being stretched or compressed.
When choosing shocks, match their length and mounting to the new ride height. Shocks that were fitted to a stock height may be too short and can bottom out. Replacing worn upper and lower mounts at the same time is a practical step, since the suspension will be loaded differently after the lift.
- Check the coil springs for sag before lifting
- Inspect shock mounts and bushings during install
- Re-torque U-bolts after the first few drives
- Verify brake hose length after the lift
- Check the front alignment after the spindles settle
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2166 |
| UPC | 70000636687 |
| Lift height | 3 inches (range 3 to 4.99 inches) |
| Suspension type | Knuckle |
| Drivetrain and front suspension | 2WD with coil spring front suspension |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Shocks | Not included |
Vehicle fitment
It fits the 2001–2008 Ford Ranger STX, Tremor, XL and XLT.
It is for 2WD trucks with coil spring front suspension, so 4WD Rangers are not covered. Match year, model and trim to your truck before buying.
Installation notes
The kit includes an alignment cam and bolt kit, so the front alignment should be checked after the spindles are installed. The rear add-a-leaf is installed with the lift block and U-bolts.
What’s included
Spindle system, alignment cam and bolt kit, and the rear lift block, U-bolts and add-a-leaf.
Not included: Shocks.









