Overview
The Fabtech K2073DL is an 8-inch front coilover conversion for the 2008–2010 Ford F-250 Super Duty and the 2008–2010 Ford F-350 Super Duty. It replaces the stock coil spring buckets with gusseted 1 3/4-inch tubing and is designed for Dirt Logic 4.0 coilover shocks. The kit includes Dirt Logic SS shocks and the rear block and U-bolt lift.
This conversion is compatible with radius arm and 4-link systems and does not work with leveling or basic systems. Hydraulic bump stops complete the setup, but they are an optional add-on and not part of this kit. The lift height range is 7 inches and up.
Key features
- 8-inch lift, range 7 inches and up
- Gusseted 1 3/4-inch tubing
- Replaces the stock coil spring buckets
- Built for Dirt Logic 4.0 coilover shocks
- Coilover hoops and lower mounts
- Dirt Logic SS shocks included
Choosing a coilover lift height
A taller front coilover conversion raises the truck further, so the change in height affects how the front geometry sits. Greater height changes driveline angles and steering geometry, and the front end often needs a fresh alignment once the conversion is in. Consider the tires and wheels that will fit under the new height before buying the kit, since clearance can become tight at full turn.
Because the kit does not work with leveling or basic systems, the front should be built around a radius arm or 4-link system. Shock length and travel also matter at this height, so check that the shock range suits the trail use you have in mind. Brake lines, sway bar links and steering components may need a look when the front is raised.
Parts that often wear sooner on a raised front include ball joints, tie rod ends and the coilover mounts themselves. Inspect them at regular service and after hard trail use. Look for leaking shock seals, clunks over bumps and steering wander as early signs that the front needs attention.
- Check brake lines and sway bar links for stretch
- Recheck alignment after the front is raised
- Inspect shock seals, mounts and tie rod ends
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2073DL |
| UPC | 674866096615 |
| Lift height | 8 inches (range 7 inches and up) |
| Suspension type | Coilover conversion |
| Conversion tubing | Gusseted 1 3/4-inch tubing |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Dirt Logic SS shocks included |
| Compatibility | Radius arm and 4-link systems; not leveling or basic systems |
Vehicle fitment
It fits the 2008–2010 Ford F-250 Super Duty and the 2008–2010 Ford F-350 Super Duty.
The list covers Super Duty trucks in those years only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The conversion replaces the stock coil spring buckets, so the front spring seat is changed as part of the install. Because the kit does not work with leveling or basic systems, check the front system on the truck before starting.
What’s included
Coilover conversion hoops, lower mounts, gusseted 1 3/4-inch tubing, the required hardware and the Dirt Logic SS shocks.
Not included: The hydraulic bump stops, which are an optional add-on.









