Overview
The Fabtech K2190 is a 6-inch Gen II basic lift for 2009–2013 Ford F-150 SuperCrew trucks. It does not fit Raptor models. The Gen II design adapts the proven designs of Fabtech’s 2014 system for earlier trucks at a lower price with a faster install.
Heavy duty 1/4-inch thick steel lower control arm crossmembers include an integrated front differential skid plate. Front spacers sit on the factory coilover shock, and Fabtech performance twin tube rear shocks are included. Extended length ductile iron steering knuckles allow 18-inch or 20-inch wheels. Tires of 325/65R18, 35/13.50R18 and 35/13.50R20 use 5-inch backspacing with minor trimming, and the OEM wheel and tire cannot be used.
Key features
- 6-inch lift, range 5 to 6.99 inches
- Gen II basic system
- Front spacers on the factory coilover shock
- 1/4-inch thick steel crossmembers
- Integrated front differential skid plate
- Extended length ductile iron steering knuckles
Gen II fitting notes
Basic lifts keep much of the factory suspension, so the parts that change most are the front spacers, steering knuckles and rear shackles. The rear lift relies on shackles and U-bolts, which should be inspected after installation and at routine service. Bolts can loosen under load, so re-torque them after the first drives.
Brake lines, the steering linkage and the driveline all see new angles after a lift, so check each for clearance during installation. Larger tires also affect speedometer accuracy and fuel economy, which many owners notice. Keep spare hardware and a torque wrench on hand for the install.
Plan a full alignment once the truck is complete, since the steering knuckles and front spacers change caster and toe.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2190 |
| UPC | 700007027751 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Front components | Crossmember drop brackets, steering knuckles, front strut spacers |
| Rear lift | Shackles, U-bolt kit |
| Skid plate | Integrated front differential skid plate |
| Tire and wheel fit | 325/65R18 on 18×9, 35/13.50R18 on 18×9, 35/13.50R20 on 20×9; 5-inch backspacing |
| Rear shocks | Fabtech performance twin tube, included |
Vehicle fitment
It fits 2009–2013 Ford F-150 trucks, including FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT models.
It fits SuperCrew models only and does not fit Raptor models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The OEM wheel and tire cannot be used with this kit, so the larger tire and wheel sizes listed need to be fitted. The lift uses shackles and a U-bolt kit at the rear, which should be checked against the truck before installing.
What’s included
Crossmember drop brackets, steering knuckles, front strut spacers, the integrated skid plate, rear shackles, a U-bolt kit and Fabtech performance twin tube rear shocks.









