Overview
The Fabtech K2371 is a 6-inch IFS lift kit with rear performance shocks for the 2021 and 2022 Ford F-150. The IFS design runs with zero bump steer through the suspension cycle, and the lift height range is 6 to 7 inches. The fitment covers King Ranch, Lariat, Limited, Platinum, SSV, Tremor, XL and XLT versions.
The factory coilover shocks are relocated from the bottom so the front can steer fully while the truck gains 6 inches of lift. At the rear, the factory 2-inch block is replaced with a 5-inch block and U-bolt system. The front factory shocks are reused, and the rear performance shocks are included.
Key features
- 6-inch IFS lift for the F-150
- Zero bump steer through the suspension cycle
- Near stock track width
- Proprietary steering knuckle geometry for a tight turning radius
- Heavy duty 1/4-inch steel crossmembers with eccentric style alignment cams
- Triple front differential mounts for vibration-free operation at speed
- Performance rear shocks
- Free 5-year, 60,000-mile powertrain warranty.
Choosing tire fitment
Tire fit on an IFS lift depends on the combination of tire diameter, width, wheel backspacing and steering lock. A larger tire moves the contact patch outward and can touch the fender, the inner liner or the front control arm at full steering. Checking clearance at full lock and at full compression gives a clearer picture than checking at rest.
Heavier tires and more aggressive tread patterns need extra room, and a change in tread can move the rubbing point even at the same size. Keep the wheel and tire pair together when comparing options. Recheck clearance after the first trail runs, since articulation can reveal rubs that do not show in the driveway.
- Test steering lock with the tire mounted before final assembly
- Compare wheel backspacing when changing wheel brands
- Look for rub marks on the inner fender after the first off-road outing
- Keep tire pressure matched to the load the truck carries
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK2371 |
| Lift height range | 6 to 7 inches |
| Front shocks | Factory, reused |
| Rear shocks | Performance, included |
| Rear lift component | Block and U-bolt, 5 inches |
| Crossmembers | 1/4-inch steel, eccentric alignment cams |
| Tire options | 35/12.50R20 on 20-inch wheels with 5-inch backspacing, minor trimming; 37/12.50R20 on 20-inch wheels, cutting required |
| Warranty | 5-year, 60,000-mile powertrain |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 2021 to 2026 Ford F-150 models in the King Ranch, Lariat, Limited, Platinum, SSV, Tremor, XL and XLT versions.
F-150 models from years other than 2021 and 2022 are not covered. Match your truck’s year, model and trim to this kit before ordering.
Installation notes
The relocated coilover shocks, the IFS geometry and the triple front differential mounts change front alignment and driveline angles, so an alignment and a driveline check belong after installation. The 37/12.50R20 tire option requires cutting.
What’s included
The kit includes the IFS components, the 1/4-inch steel crossmembers, the triple front differential mounts, the 5-inch rear block and U-bolt system and the performance rear shocks.
Not included: Tires and wheels. Choose sizes from the tire options above.











