Overview
The Fabtech K2371M is the Stealth shock version of the 6-inch IFS lift for the 2021 and 2022 Ford F-150. It has Stealth shocks at the rear, factory front shocks reused and a lift height range of 6 to 7 inches. It fits the same trucks as the performance-shock version, K2371.
Fabtech’s IFS geometry on this truck is meant to keep the front suspension working through its range without bump steer. The near-stock track width keeps the tires tucked under the fenders, and the steering knuckle geometry gives a tight lock-to-lock turning radius for maneuvering in close spaces.
Key features
- 6-inch IFS design for the F-150
- Rear Stealth shocks
- Factory front shocks reused
- Near-stock track width
- Eccentric style alignment cams on 1/4-inch steel crossmembers
- Triple front differential mounts for vibration-free operation at high speed
- 5-inch rear block and U-bolt system replacing the factory 2-inch block
- Free 5-year, 60,000-mile powertrain warranty.
Rear shock choice and fitment
The rear shock is one of the parts that sets how a lifted truck handles bumps and body motion. On a lift, the shock works at a different angle and travel range than stock, so its mounting points and length matter. Shock length should suit the new ride height, and the shock should be checked so it does not bottom out on the bump stop during normal driving.
Shocks are often replaced along with the lift because older units were built for the stock ride height. Look for leaks at the seals, a loose eye or stud, and a bushing that has hardened. A truck that keeps bouncing after bumps may have a worn shock even when no leak is visible. Keep the old hardware for comparison before installing the new parts.
- Look for oil residue along the shock body
- Check the bushings for cracking or hardening
- Tighten mounting bolts after the first drive
- Replace worn bump stops at the same time
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK2371M |
| Lift height range | 6 to 7 inches |
| Front shocks | Factory, reused |
| Rear shocks | Stealth, included |
| Rear lift component | Block and U-bolt, 5 inches |
| Tire options | 35/12.50R20 on 20-inch wheels with minor trimming; 37/12.50R20 on 20-inch wheels with cutting |
| Warranty | 5-year, 60,000-mile powertrain |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 2021 to 2026 Ford F-150 models in the King Ranch, Lariat, Limited, Platinum, SSV, Tremor, XL and XLT versions.
F-150 models from years outside 2021 and 2022 are not covered. Match your truck’s year, model and trim to this kit before ordering.
Installation notes
Moving the coilover shocks and fitting triple front differential mounts changes the front alignment and the driveline angles, so both should be checked after the install. The 37-inch tire option needs cutting. Check the front brake hoses and sway bar links for clearance once the front is at its new height.
What’s included
The kit includes the IFS components, the 1/4-inch steel crossmembers, the front differential mounts, the 5-inch rear block and U-bolt system and the Stealth rear shocks. The factory front shocks are reused and stay in service with the relocated coilovers.













