Overview
The Fabtech K1071M is a 4-inch lift with Uniball upper control arms and Stealth monotube shocks for the 2014–2018 Chevrolet Silverado 1500 and the 2014–2018 GMC Sierra 1500. It is made for trucks with factory aluminum suspension and gives clearance for 33-inch tall tires on 2014 K1500 models.
The factory upper control arms are replaced with tubular Uniball arms made from 0.120 wall 4130 chromoly with a 1.50-inch OD, using 1-inch FK stainless PTFE Uniballs. The arms allow unrestricted movement through the travel range. The front coilover shocks stay in use with a steel spacer system, the front differential is relocated to keep CV angles proper, and a 1/4-inch thick steel skid plate covers the front. The rear uses 1 1/2-inch lift blocks with U-bolts and performance rear shock absorbers.
Key features
- 4-inch lift height
- Tubular Uniball upper control arms
- 0.120 wall 4130 chromoly tubing, 1.50-inch OD
- 1-inch FK stainless PTFE Uniballs
- Front differential relocated
- Stealth monotube shocks and performance rear shock absorbers
Suspension compatibility
Replacing upper control arms changes camber and caster settings, so a full alignment is needed after the arms, coilover spacers and ball joints are in place. Uniball joints have a different feel than rubber bushings, with less flex, which transmits more road noise and vibration through the front end. Greasing or inspecting the joints on a regular schedule keeps them working smoothly.
Front lifts often expose worn steering components. Tie rod ends, drag links and sway bar links are commonly replaced at the same time, since they carry more load at the new height. Check the brake lines and the ABS wiring for stretch, because the front end moves further from the frame when the suspension is raised.
Tires and wheels are part of the setup too. Rotate and balance the tires regularly, and watch for rubbing at full lock or when the suspension compresses. Re-torque the lug nuts after the first several drives and inspect the hardware again after that.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1071M |
| UPC | 700007232901 |
| Lift height | 4 inches (range 3 to 4.99 inches) |
| Suspension type | Coilover |
| Rear lift method | Lift blocks and U-bolts, 1 1/2-inch |
| Skid plate | 1/4-inch thick steel |
| Tire and wheel fit | 33/12.50R17 on 17×8, 275/65R18 on 18×8, 295/55R20 on 20×9; minor trimming |
| Shocks | Stealth monotube shocks; performance rear shock absorbers |
Vehicle fitment
It fits the 2014–2018 Chevrolet Silverado 1500 and the 2014–2018 GMC Sierra 1500.
It fits factory aluminum suspension vehicles only. It is not made for models with Factory AutoRide shocks, all-wheel drive models or standard cab trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the factory suspension is the aluminum version before installing, since this kit only fits that type. The OEM wheel and tire cannot be used with this kit.
What’s included
Uniball upper control arms and ball joints, front coilover spacers, the differential mounts and skid plate, rear lift blocks with U-bolts, Stealth monotube shocks, rear performance shock absorbers and all required hardware.









