Overview
The Fabtech K1035 is a 4-inch spindle lift for the 1988–1998 Chevrolet C1500 and the 1988–1998 GMC C1500, including the Xtra Cab. It is a bolt-on system: the front spindles, rear blocks, U-bolts and shocks install without other major changes.
The kit gives a set ride height and ride quality suited to a straightforward installation, and it clears a 32/11.50R15 tire on a 15×8 wheel. Front and rear twin tube performance shocks come with the kit, but shock boots are not included, and the components are black.
Key features
- 4-inch lift height, range 3 to 4.99 inches
- Front steering knuckle spindles
- Rear lift blocks and U-bolts
- Front and rear twin tube performance shocks
- Black components
- Clearance for 32/11.50R15 tires on 15×8 wheels
Upkeep after installation
Bolt-on spindle lifts put new load on the front hubs, ball joints and steering linkage, so inspect the joints and tie rod ends once the truck has settled. Rear blocks and U-bolts should be re-torqued after the first few trail runs or highway trips, because the clamping hardware can loosen as the components seat. A simple walk-around every few weeks catches a loose nut before it becomes a noise or a wandering steering problem.
Twin tube performance shocks work best when the shock mounts and eye bushings are clean and free of play. Worn shock boots let dirt and water reach the piston rod, which shortens shock life, so check the boots if they are fitted separately. When tires run wider than stock, watch for rubbing at full steering lock and at full compression, and adjust the alignment after any spindle or tie rod work.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1035 |
| UPC | 70000212342 |
| Lift height | 4 inches (range 3 to 4.99 inches) |
| Suspension type | Knuckle |
| Rear lift method | Lift blocks and U-bolts |
| Maximum tire size | 32/11.50R15 |
| Wheel size | 15×8 |
| Wheel backspacing | Maximum 3 3/4 inches for aftermarket wheels |
| Shocks | Front and rear twin tube performance shocks |
| Shock boots | Not included |
| Component color | Black |
Vehicle fitment
It is a direct fit for the 1988–1998 Chevrolet C1500 and the 1988–1998 GMC C1500.
Excluded models are the 454SS and the C2500 6-lug standard cab. Verify the year, model and trim against your truck before ordering.
Installation notes
This is a bolt-on installation. Aftermarket wheels with a maximum backspacing of 3 3/4 inches are needed for oversized tires, because the original wheels cannot run them.
What’s included
Front spindles, rear blocks, U-bolts and front and rear twin tube performance shocks. The shock boots are not included.
Not included: Shock boots.









