Overview
The Fabtech K1070 is a 4-inch budget lift for the 2014–2018 Chevrolet Silverado 1500 and the 2014–2018 GMC Sierra 1500 with factory aluminum suspension. It gives clearance for 33-inch tall tires on 2014 K1500 trucks with that suspension.
The front keeps the factory coilover shocks and adds a steel spacer system, which Fabtech says helps retain the stock ride. The stock upper control arms are replaced with thick wall DOM tubular arms that use heavy duty extended range ball joints, and the front differential is relocated to keep CV angles proper at the new height. A 1/4-inch thick steel skid plate protects the front, and the rear uses 1 1/2-inch lift blocks with U-bolts.
Rear performance shock absorbers replace the stock units to add damping.
Key features
- 4-inch budget lift
- Thick wall DOM tubular ball joint upper control arms
- Heavy duty extended range ball joints
- Front coilover spacers on the factory coilover shocks
- 1/4-inch thick steel differential skid plate
- Rear performance shock absorbers
Before choosing a budget lift
A budget lift like this one keeps the factory coilover shocks and adds spacers, so the front ride stays closer to stock than with a full coilover conversion. The ball joint upper control arms carry the steering and braking loads through the new geometry, which makes their installation worth careful measurement. Factory aluminum suspension is a different setup from steel suspension, so confirm the type before buying.
Rear performance shock absorbers help control the extra travel that comes with the lift blocks. Check the rear shock mounts and U-bolt fasteners after the first few drives, since blocks can settle. The front differential is relocated in this design, so inspect the CV axles for binding at full steering and full travel once the truck has been driven on uneven ground.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1070 |
| UPC | 70000676603 |
| Lift height | 4 inches |
| Front lift | Coilover spacers with ball joint upper control arms |
| Rear lift | 1 1/2-inch lift blocks and U-bolts |
| Skid plate | 1/4-inch thick steel |
| Shocks | Rear performance shock absorbers |
| Tire clearance | 33-inch tall tires on 2014 K1500 trucks with factory aluminum suspension |
Vehicle fitment
It is a direct fit for the 2014–2018 Chevrolet Silverado 1500 and the 2014–2018 GMC Sierra 1500 with factory aluminum suspension.
The kit is for trucks with factory aluminum suspension only. Verify the year, model and trim against your truck before ordering.
Installation notes
Confirm the factory suspension is the aluminum type before installing, because the kit is made only for that version. The OEM wheel and tire cannot be used with this lift.
What’s included
Ball joint upper control arms, front coilover spacers, the differential skid plate, the rear lift blocks with U-bolts and the rear performance shock absorbers.









