Overview
The Fabtech K1014M is a 6-inch lift with Stealth monotube shocks for the 2001–2010 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 trucks, along with the 2007 Classic versions of those trucks. The front uses one-piece ductile iron drop-down steering knuckles mounted to heavy duty, high arched lower control arm crossmembers made of 1/4-inch steel.
The front differential is relocated on a cradle-style bracket with bushings set at a suitable angle, which lets the factory front driveshaft stay in use without vibration on AutoTrac models. Billet steel sway bar end links with urethane bushings keep the factory sway bar angle. The stock upper control arms and steering centerlink stay in place and do not need to come out for installation.
Key features
- 6-inch lift height
- One-piece ductile iron drop-down steering knuckles
- Heavy duty 1/4-inch steel, high arched crossmembers
- Cradle-style differential relocation
- Billet steel sway bar end links with urethane bushings
- Stealth monotube shocks
Wheel and tire planning
Wheel fitment is one of the first things to settle with a lift like this. OEM 17-inch wheels need to be replaced with 17-inch or larger aftermarket wheels, and backspacing has to suit the chosen tire so it clears the fender and steering components. Planning this ahead keeps the install from stalling halfway through.
The stock upper control arms and steering centerlink stay in place, so the front is built around them. The drop-down knuckles and high arched crossmembers change front geometry, which makes an alignment after installation a standard step. Rear block kits and add-a-leaf parts also change the axle position, so check the U-bolts once the truck has been driven.
- Check wheel backspacing against the tire
- Align the front after installation
- Recheck U-bolt torque after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1014M |
| UPC | 700007232671 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Front components | Steering knuckles, crossmembers, impact struts, torsion bar drop brackets |
| Rear lift | 5-inch block kit and add-a-leaf |
| Tire and wheel fit | 315/75R16 on 16×10, 315/70R17 on 17×9, 325/65R18 on 18×9, each with 4 5/8 or 5-inch backspacing and minor trimming |
| Shocks | Stealth monotube shocks |
Vehicle fitment
It fits the 2001–2010 Chevrolet Silverado 2500 HD and 3500 models, the 2007 Silverado 2500 HD Classic and 3500 Classic, and the 2007–2010 Silverado 3500 HD. The GMC Sierra equivalents fit in the same years.
The kit does not fit AutoRide shocks or all-wheel drive models, and larger tires cannot go on OEM wheels. 1500 trucks are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
If the truck has OEM 17-inch wheels, aftermarket wheels of 17 inches or larger are needed. The stock upper control arms and steering centerlink stay in place, so the install is built around them.
What’s included
Drop-down steering knuckles, high arched crossmembers, crossmember impact struts, torsion bar drop down brackets, a differential skid plate and relocation bracket, billet sway bar end links, a 5-inch block kit, an add-a-leaf and Stealth monotube shocks.









