Overview
The Dana Spicer 1310 Series pinion yoke, part number 2-4-8091-1X, is a replacement pinion yoke for Dana 30 and Dana 44 front or rear axles and the Dana 300 transfer case. It has a 22.5 degree joint angle and comes with a slinger, making it a stock replacement for a worn yoke.
Compare the retainer on your current yoke with this one before removing the old yoke, since the retainer styles differ between yoke designs.
Key features
- 1310 Series U-joint yoke
- 22.5 degree joint angle
- Includes slinger
- Stock replacement design
- Fits Dana 30 and Dana 44 front or rear axles and the Dana 300 transfer case.
Choosing and fitting a pinion yoke
A pinion yoke is the splined connection between the pinion gear and the driveshaft U-joint. It carries driveline torque from the differential to the shaft while the joint flexes with suspension travel. On a lifted vehicle or one with a changed driveshaft angle, the joint angle and the way the shaft sits matter more, so a yoke that suits your existing driveline is the safest choice.
A worn yoke often shows up as a clunk when the drivetrain loads and unloads, vibration at speed, or a groove where the seal rides. Replacing the yoke usually means replacing the pinion seal too, and the pinion nut must be torqued with the new yoke in place. Inspect the U-joint caps and slinger while the driveline is apart.
- Check the U-joint series before buying
- Inspect the seal surface for grooves
- Replace the pinion seal with the yoke
- Torque the pinion nut to the correct value
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2-4-8091-1X |
| UPC | 23913230050 |
| U-joint series | 1310 Series |
| Joint angle | 22.5 degree |
| Included | Slinger |
| Retainer style | Bolt and strap; U-bolt style yoke |
| Axle location | Front, Rear |
| Axle types | Dana 30 or Dana 44 |
| Transfer case | Dana 300 |
Vehicle fitment
Fit is by axle type: Dana 30 or Dana 44 front or rear axles and the Dana 300 transfer case. Match the axle type and U-joint series before ordering.
Fit is not tied to a specific vehicle model or year, so do not assume a fit from the axle name alone. Check your vehicle’s year, model and trim before ordering.
Installation notes
Compare the joint angle and included slinger with your current yoke before removing the old one.
What’s included
The yoke includes a slinger. Not included: Check the package contents against your installation before starting. The pinion nut and seal are not covered here.











