Overview
The Dana Spicer output shaft yoke nut, part number 30185, is a front output shaft yoke nut for Dana 30 and Dana 44 axles. It has a .750-16 thread, a 1.125 hex and a 0.563 thickness, and it is used with washer D/S30186.
It is used on Model 25, 27, 30 and 44 axles and the Quadra-Trac transfer case. Applications by year and model are covered below.
Key features
- Thread size .750-16 and hex size 1.125
- Thickness 0.563
- Front position
- Designed for use with washer D/S30186
- Fits Model 25, 27, 30 and 44 axles and the Quadra-Trac transfer case
Installing a yoke nut
The output shaft yoke nut holds the yoke on the shaft and sets the bearing preload that keeps the output shaft turning smoothly. Because the nut controls preload, it is tightened in stages and checked as it is set rather than cranked down in one pass. Use a torque wrench for the final setting and check the preload with the yoke in place.
Thread condition matters as much as the torque setting. Chase or clean the output shaft threads before fitting the nut, and replace any nut with damaged threads. The washer should sit flat against the yoke as designed, and a washer that is bent or worn should be replaced at the same time. Keep the nut and washer together as a set.
- Clean and inspect the output shaft threads
- Tighten in stages and check preload
- Replace bent or worn washers
- Use a torque wrench for the final setting
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 30185 |
| UPC | 23913137465 |
| Position | Front |
| Thread size | .750-16 |
| Hex size | 1.125 |
| Thickness | 0.563 |
| Used with | Washer D/S30186 |
| Transfer case | Quadra-Trac |
Vehicle fitment
Applications include Wrangler, Rubicon and Unlimited 1987 to 2006 with Dana 30; CJ 1972 to 1975 and 1986 with Dana 30 and Dana 44; XJ Cherokee 1987 to 2000 with Dana 30; MJ Comanche 1986 to 1992 with Dana 30; and SJ Full Size and J-series trucks 1973 to 1991 with Dana 44.
XJ Cherokee fit depends on the axle: 1985 to 2000 with a nondisconnect axle and 1984 to 1991 with a disconnect axle. Check which axle your vehicle has before ordering.
Installation notes
Plan for washer D/S30186 as a separate part, since it is used with this nut.
What’s included
The item is the nut only. Not included: washer part D/S30186.













